19-3879; Rev 0; 10/05
I2C Port Expander with Eight Push-Pull Outputs
General Description
The MAX7320 2-wire serial-interfaced peripheral fea-
tures eight push-pull outputs with selectable power-up
logic states.
Features
ꢀ 400kHz, +5.5V-Tolerant I2C Serial Interface
ꢀ +1.71V to +5.5V Operating Voltage
ꢀ Eight Push-Pull Output Ports with Selectable
The +5.5V tolerant RST input clears the serial interface,
†
terminating any I2C communication to or from the
Power-Up Logic States
MAX7320.
ꢀ RST Clears the Serial Interface, Terminating Any
The MAX7320 uses two address inputs with four-level
logic to allow 16 I2C slave addresses. The slave
address also determines the power-up state level for
the outputs in groups of four ports.
Serial Transaction to or from the MAX7320
ꢀ AD0 and AD2 Inputs Select from 16 Slave
Addresses
The MAX7320 supports hot insertion. The serial inter-
face SDA, SCL, AD0, AD2, and RST remain high
impedance in power-down (V+ = 0V) with up to +6V
asserted on them.
ꢀ Low 0.6µA (typ) Standby Current
ꢀ -40°C to +125°C Temperature Range
The MAX7320 is one device in a family of pin-compatible
port expanders with a choice of input ports, open-drain
I/O ports, and push-pull output ports (see Table 1).
Ordering Information
The MAX7320 is available in 16-pin QSOP and 16-pin
TQFN packages, and is specified over the automotive
temperature range (-40°C to +125°C).
TEMP
RANGE PACKAGE
PIN-
TOP
MARK CODE
PKG
PART
-40°C to
16 QSOP
+125°C
MAX7320AEE+
—
E16-4
Applications
16 TQFN
-40°C to
Cell Phones/PDAs
Satellite Radios
Notebooks
Automotive
RAID
Servers
3mm x 3mm
+125°C
MAX7320ATE+
ADB T1633-4
x 0.8mm
+Denotes lead-free package.
Pin Configurations, Typical Application Circuit, and
Functional Diagram appear at end of data sheet.
Selector Guide
PART
INPUTS
INTERRUPT MASK
OPEN-DRAIN OUTPUTS
PUSH-PULL OUTPUTS
MAX7319
MAX7320
MAX7321
MAX7322
8
—
Yes
—
—
—
—
8
Up to 8
4
—
Up to 8
—
—
4
Yes
MAX7323
MAX7328*
Up to 4
—
—
—
Up to 4
4
—
—
Up to 8
Up to 8
MAX7329**
*Second source to PCF8574.
**Second source to PCF8574A.
Purchase of I2C components from Maxim Integrated Products, Inc., or one of its sublicensed Associated Companies, conveys a
†
license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C
Standard Specification as defined by Philips.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.