±9-2032; Rev 5; 6/±±
Remote ±±1° Accurate Diꢀital ꢁemperature
Sensors with SPI-°ompatible Serial Interface
7/MAX628
General Description
Features
♦ Accuracy
The MAX6627/MAX6628 precise digital temperature
sensors report the temperature of a remote sensor. The
remote sensor is a diode-connected transistor, typically
a low-cost, easily mounted 2N3904 NPN type that
replaces conventional thermistors or thermocouples.
The MAX6627/MAX6628 can also measure the die tem-
perature of other ICs, such as microprocessors (µPs) or
microcontrollers (µCs) that contain an on-chip, diode-
connected transistor.
1°C (max) from 0°C ≤ T ≤ +125°C, T = +30°C
RJ
A
2.4°C (max) from -55°C ≤ T ≤ +100°C,
RJ
0°C ≤ T ≤ +70°C
A
♦ 12-Bit + Sign, 0.0625°C Resolution
♦ Low Power Consumption
30µA (typ) (MAX6628)
200µA (typ) (MAX6627)
♦ Operating Temperature Range (-55°C to +125°C)
Remote accuracy is ±±1C when the temperature of the
remote diode is between 01C and +±251C and the tem-
perature of the MAX6627/MAX6628 is +301C. The tem-
perature is converted to a ±2-bit + sign word with
0.06251C resolution. The architecture of the device is
capable of interpreting data as high as +±451C from
the remote sensor. The MAX6627/MAX6628 tempera-
ture should never exceed +±251C.
♦ Measurement Temperature Range, Remote
Junction (-55°C to +145°C)
♦ 0.5s (MAX6627) or 8s (MAX6628) Conversion Rate
♦ SPI-Compatible Interface
♦ +3.0V to +5.5V Supply Range
♦ 8-Pin SOT23 and TDFN Packages
♦ Lead(Pb)-Free Version Available (TDFN Package)
These sensors are 3-wire serial interface SPI™ compat-
ible, allowing the MAX6627/MAX6628 to be readily con-
nected to a variety of µCs. The MAX6627/MAX6628 are
read-only devices, simplifying their use in systems
where only temperature data is required.
Orderinꢀ Information
PART
PIN-PACKAGE
8 SOT23
TOP MARK
AEQD
MAX6627MKA#TG16
MAX6627MTA+T
MAX6628MTA+T
8 TDFN-EP*
8 TDFN-EP*
AUT
Two conversion rates are available, one that continu-
ously converts data every 0.5s (MAX6627), and one
that converts data every 8s (MAX6628). The slower ver-
sion provides minimal power consumption under all
operating conditions (30µA, typ). Either device can be
read at any time and provide the data from the last con-
version.
AUU
Note: All devices are specified over the -551C to +±251C oper-
ating temperature range.
#Denotes a RoHS-compliant device that may include lead(Pb)
that is exempt under the RoHS requirements.
+Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.
Both devices operate with supply voltages between
+3.0V and +5.5V, are specified between -551C and
+±251C, and come in space-saving 8-pin SOT23 and
lead-free TDFN packages.
*EP = Exposed pad.
ꢁypical Operatinꢀ °ircuit
+ 3V TO + 5.5V
0.1μF
Applications
Hard Disk Drive
V
GND
CC
Smart Battery Packs
Automotive
MAX6627
MAX6628
Industrial Control Systems
Notebooks, PCs
SDO
DXP
DXN
μC
2200pF
CS
SPI is a trademark of Motorola, Inc.
SCK
Pin Configurations appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim's website at www.maxim-ic.com.