19-3003; Rev 0; 12/07
5-Channel Precision Temperature Monitor
General Description
Features
♦ Four Thermal-Diode Inputs
♦ Local Temperature Sensor
The MAX6622 precision multichannel temperature sen-
sor monitors its own temperature and the temperatures
of up to four external diode-connected transistors. All
temperature channels have programmable alert thresh-
olds. Channels 1 and 4 also have programmable
overtemperature thresholds. When the measured tem-
perature of a channel exceeds the respective thresh-
old, a status bit is set in one of the status registers. Two
open-drain outputs, OVERT and ALERT, assert corre-
sponding to these bits in the status register.
♦ 1°C Remote Temperature Accuracy (+60°C to +100°C)
♦ Temperature Monitoring Begins at POR for Fail-
Safe System Protection
♦ ALERT and OVERT Outputs for Interrupts,
Throttling, and Shutdown
♦ STBY Input for Hardware Standby Mode
♦ Small, 16-Pin TSSOP Package
♦ 2-Wire SMBus Interface
The 2-wire serial interface supports the standard system
management bus (SMBus™) protocols: write byte, read
byte, send byte, and receive byte for reading the tem-
perature data and programming the alarm thresholds.
♦ Penryn CPU-Compatible
♦ Pin- and Register-Compatible with MAX6602
The MAX6622 is specified for a -40°C to +125°C oper-
ating temperature range and is available in a 16-pin
TSSOP package.
Ordering Information
PIN-
PACKAGE
MAX6622UE9A+ 16 TSSOP
SLAVE
ADDRESS
1001 101
PKG
CODE
U16-1
PART
Applications
Desktop Computers
Notebook Computers
Workstations
Note: This device is specified over the -40°C to +125°C
temperature range.
+Denotes lead-free package.
Servers
SMBus is a trademark of Intel Corp.
Pin Configuration appears at end of data sheet.
Typical Application Circuit
+3.3V
CPU
4.7kΩ
EACH
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
DXP1
DXN1
DXP2
DXN2
DXP3
DXN3
DXP4
DXN4
GND
SMBCLK
SMBDATA
ALERT
2200pF
2200pF
2200pF
2200pF
CLK
DATA
MAX6622
INTERRUPT
TO μP
V
CC
0.1μF
OVERT
TO SYSTEM
SHUTDOWN
N.C.
STBY
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.