19-3915; Rev 1; 1/07
High-Bandwidth T1/E1 Dual-SPDT Switches/
4:1 Muxes
General Description
Features
♦ Dual SPDT and 4:1 Multiplexer Configurations
♦ Dual-Supply Operation from ±±3±ꢀ to ±ꢁꢀ
♦ Single-Supply Operation from +6ꢀ to +11ꢀ
The MAX4818/MAX4819 high-bandwidth, low-on-resis-
tance analog dual SPDT switches/4:1 multiplexers are
designed to serve as integrated T1/E1 protection
switches for 1+1 and N+1 line-card redundancy appli-
cations. Each MAX4818/MAX4819 replaces four
electromechanical relays, significantly reducing board
space, simplifying PC board routing, and reducing
power consumption. These devices operate with ±±.±3
or ±ꢀ3 dual supplies for applications reꢁuiring T1/E1
signal switching in the line side of the interface trans-
former. Internal voltage multipliers drive the analog
switches, yielding excellent linearity and low 4Ω typical
on-resistance within the T1/E1 analog signal range. This
high-bandwidth family of products is optimized for low
return loss and matched pulse template performance in
T1/E1 long-haul and short-haul applications.
♦ Hot-Insertion Tolerant with No DC Path to the
Supplies
♦ Low On-Resistance, R
= 4Ω (typ) and 6Ω (max)
ON
♦ Over ±ꢁ0MHz -±dB Signal Bandwidth (MAX4818)
♦ Excellent Crosstalk and Off-Isolation Performance
Over the T1/E1 Signal Spectrum: Over 110dB
Crosstalk Attenuation at 1MHz (MAX4818)
♦ Low Current Consumption of 2mA (max)
♦ -40°C to +8ꢁ°C Extended Temperature Range
♦ Space-Saving, 16-Pin, ꢁmm x ꢁmm Thin QFN
The MAX4818/MAX4819 are available in a tiny 16-pin,
ꢀmm x ꢀmm, thin QFN package and are specified over
the extended -40°C to +8ꢀ°C temperature range.
♦ SET Controls All Switches Simultaneously For
Applications
Redundancy Switching (MAX4819)
T1/E1 Redundancy Switching
Base Stations and Base-Station Controllers
Add and Drop Multiplexers
Multi-Service Provisioning Platforms
Edge Routers
Pin Configurations
TOP VIEW
12
11
10
9
COM1
IN1
Multi-Service-Switches (MSSs)
Digital Loop Carriers
13
14
15
16
8
7
6
5
COM2
IN2
MAX4818
Industrial Applications
Data Acꢁuisition
SET
EN
+
1
*EP
N.C.
N.C.
Telecom Signal Switching
Test Eꢁuipment
2
3
4
Avionics
THIN QFN (ꢁmm x ꢁmm)
*EXPOSED PADDLE CONNECTED TO ꢀ-
Pin Configurations continued at end of data sheet.
Ordering Information
PART
TEMP RANGE
-40°C to +8ꢀ°C
-40°C to +8ꢀ°C
PIN-PACKAGE
16 TQFN-EP*
16 TQFN-EP*
CONFIGURATION
2 x SPDT
PACKAGE CODE
T16ꢀꢀ-±
MAX4818ETE+
MAX4819ETE+
4:1 MUX
T16ꢀꢀ-±
*EP = Exposed Paddle
Devices are available in lead-free packages.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.