5秒后页面跳转
MAX4000_V01 PDF预览

MAX4000_V01

更新时间: 2024-11-06 02:52:23
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
19页 692K
描述
2.5GHz 45dB RF-Detecting Controllers

MAX4000_V01 数据手册

 浏览型号MAX4000_V01的Datasheet PDF文件第2页浏览型号MAX4000_V01的Datasheet PDF文件第3页浏览型号MAX4000_V01的Datasheet PDF文件第4页浏览型号MAX4000_V01的Datasheet PDF文件第5页浏览型号MAX4000_V01的Datasheet PDF文件第6页浏览型号MAX4000_V01的Datasheet PDF文件第7页 
19-2288; Rev 2; 12/07  
2.5GHz 45dB RF-Detecting Controllers  
General Description  
Features  
Complete RF-Detecting PA Controllers  
The MAX4000/MAX4001/MAX4002 low-cost, low-power  
logarithmic amplifiers are designed to control RF power  
amplifiers (PA) operating in the 0.1GHz to 2.5GHz fre-  
quency range. A typical dynamic range of 45dB makes  
this family of log amps useful in a variety of wireless appli-  
cations including cellular handset PA control, transmitter  
power measurement, and RSSI for terminal devices.  
Logarithmic amplifiers provide much wider measurement  
range and superior accuracy to controllers based on  
diode detectors. Excellent temperature stability is  
achieved over the full operating range of -40°C to +85°C.  
Variety of Input Ranges  
MAX4000: -58dBV to -13dBV  
(-45dBm to 0dBm in 50Ω)  
MAX4001: -48dBV to -3dBV  
(-35dBm to +10dBm in 50Ω)  
MAX4002: -43dBV to +2dBV  
(-30dBm to +15dBm in 50Ω)  
Frequency Range from 100MHz to 2.5GHz  
Temperature Stable Linear-in-dB Response  
Fast Response: 70ns 10dB Step  
10mA Output Sourcing Capability  
Low Power: 17mW at 3V (typ)  
The choice of three different input voltage ranges elimi-  
nates the need for external attenuators, thus simplifying  
PA control-loop design. The logarithmic amplifier is a volt-  
age-measuring device with a typical signal range of  
-58dBV to -13dBV for the MAX4000, -48dBV to -3dBV for  
the MAX4001, and -43dBV to +2dBV for the MAX4002.  
Shutdown Current 30µA (max)  
The input signal for the MAX4000 is internally AC-coupled  
using an on-chip 5pF capacitor in series with a 2kΩ input  
resistance. This highpass coupling, with a corner at  
16MHz, sets the lowest operating frequency and allows  
the input signal source to be DC grounded. The  
MAX4001/MAX4002 require an external coupling capaci-  
tor in series with the RF input port. These PA controllers  
feature a power-on delay when coming out of shutdown,  
holding OUT low for approximately 5µs to ensure glitch-  
free controller output.  
Available in an 8-Bump UCSP and a Small 8-Pin  
µMAX Package  
Ordering Information  
PIN-  
PACKAGE  
TOP  
MARK  
PART  
TEMP RANGE  
ABF  
MAX4000EBL-T -40°C to +85°C  
MAX4000EUA -40°C to +85°C  
MAX4001EBL-T -40°C to +85°C  
MAX4001EUA -40°C to +85°C  
MAX4002EBL-T -40°C to +85°C  
MAX4002EUA -40°C to +85°C  
8 UCSP-8  
8 µMAX  
The MAX4000/MAX4001/MAX4002 family is available in  
ABE  
8 UCSP-8  
8 µMAX  
®
an 8-pin µMAX package and an 8-bump chip-scale  
package (UCSP™). The device consumes 5.9mA with a  
5.5V supply, and when powered down the typical shut-  
down current is 13µA.  
ABD  
8 UCSP-8  
8 µMAX  
Applications  
Pin Configurations appear at end of data sheet.  
Transmitter Power Measurement and Control  
TSSI for Wireless Terminal Devices  
Cellular Handsets (TDMA, CDMA, GPRS, GSM)  
RSSI for Fiber Modules  
Functional Diagram  
OUTPUT  
ENABLE  
DELAY  
SHDN  
V
CC  
-
gm  
+
X1  
OUT  
DET  
DET  
DET  
DET  
DET  
CLPF  
SET  
RFIN  
10dB  
10dB  
10dB  
10dB  
V-I  
LOW-  
NOISE  
BANDGAP  
OFFSET  
COMP  
µMAX is a registered trademark of Maxim Integrated Products, Inc.  
UCSP is a trademark of Maxim Integrated Products, Inc.  
MAX4000  
GND  
(PADDLE)  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,  
or visit Maxim’s website at www.maxim-ic.com.  

与MAX4000_V01相关器件

型号 品牌 获取价格 描述 数据表
MAX40000 MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000 ADI

获取价格

1.7V、0.9μA、内置基准的比较器
MAX40000ANT12+T MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000ANT16+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000ANT19+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000ANT22+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000AUT12+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000AUT16+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000AUT19+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere
MAX40000AUT22+T* MAXIM

获取价格

1.7V, 0.9μA Comparators with Built-in Refere