Click here to ask about the production status of specific part numbers.
MAX38902A/MAX38902B/
MAX38902C/MAX38902D
10.5μV
Low Noise 500mA LDO Linear
Regulator
RMS
General Description
Benefits and Features
The MAX38902A/B/C/D are low-noise, linear regulators
● 1.7V to 5.5V Input Voltage Range
that deliver up to 500mA of output current with only
● 0.6V to 5.3V Output Voltage Range
10.5µV
of output noise from 10Hz to 100kHz. These
● 10.5μV
Output Noise, 10Hz to 100kHz
RMS
RMS
regulators maintain ±1% output accuracy over a wide in-
put voltage range, requiring only 100mV of input-to-output
headroom at full load. The 365µA no-load supply current
is independent of dropout voltage.
● 365μA Operating Supply Current
● 70dB PSRR at 10kHz
● 500mA Maximum Output Current
● ±1% DC Accuracy over Load, Line, and Temperature
● 100mV (max) Dropout at 500mA Load (3.6V )
IN
The MAX38902A have nine, pin-selectable output volt-
ages 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, 3.1V, 3.3V, 4.0V, and
5V. The MAX38902B/C have a resistor-adjustable output
voltage in the range of 0.6V to 5.3V. The MAX38902B also
includes an active-low POK output.
● < 0.1μA Shutdown Supply Current
● Stable with 2μF (min) Output Capacitance
● Programmable Soft-Start Rate
● Overcurrent and Overtemperature Protection
● Output-to-Input Reversed Current Protection
● POK Output
● Pin-to-Pin Compatible with MAX8902 (TDFN)
● 1.22mm x 0.82mm, 2 x 3 Bump, 0.4mm Pitch WLP; or
2mm x 2mm, 8-Pin TDFN Package
The MAX38902D have factory-preset output voltages
ranging from 0.7V to 5V. All versions include a program-
mable output soft-start rate, output overcurrent, and ther-
mal-overload protection.
The MAX38902A/B are offered in an 8-pin TDFN package,
while the MAX38902C/D are offered in a 2 x 3, 0.4mm
wafer-level package (WLP).
Ordering Information appears at end of data sheet.
Applications
● Communication Circuitry
● Audio Systems
● High-Resolution Data Acquisition Systems
19-100191; Rev 9; 6/21