5秒后页面跳转
MAX3535ECWI+T PDF预览

MAX3535ECWI+T

更新时间: 2024-09-23 20:09:03
品牌 Logo 应用领域
美信 - MAXIM 驱动信息通信管理光电二极管接口集成电路驱动器
页数 文件大小 规格书
26页 809K
描述
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28

MAX3535ECWI+T 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:SOP, SOP28,.4针数:28
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:1.5差分输出:YES
驱动器位数:1输入特性:DIFFERENTIAL SCHMITT TRIGGER
接口集成电路类型:LINE TRANSCEIVER接口标准:EIA-422; EIA-485
JESD-30 代码:R-PDSO-G28JESD-609代码:e3
长度:17.9 mm湿度敏感等级:1
功能数量:1端子数量:28
最高工作温度:70 °C最低工作温度:
最小输出摆幅:1.5 V最大输出低电流:0.004 A
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOP28,.4封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
电源:3.3,5 V认证状态:Not Qualified
最大接收延迟:855 ns接收器位数:1
座面最大高度:2.65 mm子类别:Line Driver or Receivers
最大压摆率:70 mA最大供电电压:5.5 V
最小供电电压:3 V标称供电电压:3.3 V
表面贴装:YES技术:BICMOS
温度等级:COMMERCIAL端子面层:Tin (Sn)
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
最大传输延迟:1560 ns宽度:7.5 mm
Base Number Matches:1

MAX3535ECWI+T 数据手册

 浏览型号MAX3535ECWI+T的Datasheet PDF文件第2页浏览型号MAX3535ECWI+T的Datasheet PDF文件第3页浏览型号MAX3535ECWI+T的Datasheet PDF文件第4页浏览型号MAX3535ECWI+T的Datasheet PDF文件第5页浏览型号MAX3535ECWI+T的Datasheet PDF文件第6页浏览型号MAX3535ECWI+T的Datasheet PDF文件第7页 
EVALUATION KIT AVAILABLE  
MAX3535E/MXL1535E  
+3V to +5V, 2500V  
Isolated RS-485/RS-422  
RMS  
Transceivers with ±±5ꢀV ꢁSD ꢂrotection  
General Description  
Features  
2500V  
RS-485 Bus Isolation Using On-Chip  
RMS  
The MAX3535E/MXL1535E isolated RS-485/RS-422 full-  
High-Voltage Capacitors  
duplex transceivers provide 2500V  
of galvanic isola-  
RMS  
tion between the RS-485/RS-422 side and the processor  
or control logic side. These devices allow fast,  
1000kbps communication across an isolation barrier  
when the common-mode voltages (i.e., the ground  
potentials) on either side of the barrier are subject to  
large differences. Isolation is achieved through integrat-  
ed high-voltage capacitors. The MAX3535E/MXL1535E  
also feature a 420kHz transformer driver that allows  
power transfer to the RS-485 side using an external  
transformer.  
1000kbps Full-Duplex RS-485/RS-422  
Communication  
+3V to +5.5V Power-Supply Voltage Range  
(MAX3535E)  
+4.5V to +5.5V Power-Supply Voltage Range  
(MXL1535E)  
1/8 Unit Receiver Load, Allowing 256 Devices on  
Bus  
15kV ESD Protection Using HBM  
Pin-Selectable Slew-Rate Limiting Controls EMI  
Hot-Swap-Protected Driver-Enable Input  
Undervoltage Lockout  
The MAX3535E/MXL1535E include one differential driver,  
one receiver, and internal circuitry to send the RS-485  
signals and control signals across the isolation barrier  
(including the isolation capacitors). The MAX3535E/  
MXL1535E RS-485 receivers are 1/8 unit load, allowing  
up to 256 devices on the same bus.  
Isolation-Barrier Fault Detection  
Short-Circuit Protected  
Thermal Shutdown  
The MAX3535E/MXL1535E feature true fail-safe circuitry.  
The driver outputs and the receiver inputs are protected  
from 15kV electrostatic discharge (ESꢀ) on the inter-  
face side, as specified in the Human Body Model (HBM).  
Open-Line and Shorted-Line Fail-Safe Receiver  
Inputs  
Ordering Information  
The MAX3535E/MXL1535E feature driver slew-rate  
select that minimizes electromagnetic interference (EMI)  
and reduces reflections. The driver outputs are short-cir-  
cuit and overvoltage protected. Other features are hot-  
swap capability and isolation-barrier fault detection.  
POWER-  
SUPPLY  
RANGE  
(V)  
PIN-  
PART  
TEMP RANGE  
PACKAGE  
+3.0 to +5.5  
+3.0 to +5.5  
+4.5 to +5.5  
+4.5 to +5.5  
MAX3535ECWI 0°C to +70°C 28 Wide SO  
MAX3535EEWI -40°C to +85°C 28 Wide SO  
MXL1535ECWI 0°C to +70°C 28 Wide SO  
The MAX3535E operates with a single +3V to +5.5V  
power supply. The improved secondary supply range of  
the MAX3535E allows the use of step-down transformers  
for +5V operation, resulting in considerable power sav-  
ings. The MXL1535E operates with a single +4.5V to  
+5.5V power supply. The MXL1535E is a function-/pin-  
compatible improvement of the LTC1535. The  
MAX3535E/MXL1535E are available over the commer-  
cial 0°C to +70°C and extended -40°C to +85°C temper-  
ature ranges.  
MXL1535EEWI -40°C to +85°C  
28 Wide SO  
ꢂin Configuration  
TOP VIEW  
V
1
2
3
4
28 RO1  
27 RE  
26 DE  
25 DI  
CC1  
ST1  
ST2  
Applications  
GND1  
Isolated RS-485 Systems  
Systems with Large Common-Mode Voltages  
Industrial-Control Local Area Networks  
Telecommunications Systems  
MAX3535E  
MXL1535E  
GND2 11  
18 SLO  
17 RO2  
Z
12  
13  
14  
Y
16  
15  
A
B
V
CC2  
WIDE SO  
PINS 5–10 and 19–24 ARE REMOVED FROM THE PACKAGE  
For pricing, delivery, and ordering information, please contact Maxim Direct  
19-3270; Rev 0; 4/04  
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.  

MAX3535ECWI+T 替代型号

型号 品牌 替代类型 描述 数据表
MAX3535ECWI MAXIM

完全替代

+3V to +5V, 2500VRMS Isolated RS-485/RS-422 T
MAX3535EEWI+T MAXIM

类似代替

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28
MAX3535EEWI+ MAXIM

类似代替

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28

与MAX3535ECWI+T相关器件

型号 品牌 获取价格 描述 数据表
MAX3535EEVKIT MAXIM

获取价格

Center-Tapped, Full-Wave Rectifier Output
MAX3535EEVKIT+ MAXIM

获取价格

Center-Tapped, Full-Wave Rectifier Output
MAX3535EEWI MAXIM

获取价格

+3V to +5V, 2500VRMS Isolated RS-485/RS-422 T
MAX3535EEWI+ MAXIM

获取价格

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28
MAX3535EEWI+T MAXIM

获取价格

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28
MAX3535EEWI-T MAXIM

获取价格

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO28, SOIC-28
MAX3537UTC ROCHESTER

获取价格

50MHz - 878MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER, 4 X 4 MM, 0.80 MM HEIGHT, MO-22
MAX3537UTC+ ROCHESTER

获取价格

50MHz - 878MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER, 4 X 4 MM, 0.80 MM HEIGHT, LEAD
MAX3538UTC+ ROCHESTER

获取价格

50MHz - 878MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER, 4 X 4 MM, 0.80 MM HEIGHT, LEAD
MAX353C/D MAXIM

获取价格

Precision, Quad, SPST Analog Switches