MAX3227
3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD PROTECTION
www.ti.com
SLLS673A–AUGUST 2005–REVISED FEBRUARY 2006
FEATURES
APPLICATIONS
•
Battery-Powered, Hand-Held, and Portable
Equipment
•
Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU v.28 Standards
•
•
•
•
PDAs and Palmtop PCs
Notebooks, Sub-Notebooks, and Laptops
Digital Cameras
•
•
•
•
•
•
Operates With 3-V to 5.5-V VCC Supply
Operates at Least 1 Mbit/s
Low Standby Current . . . 1 µA Typ
External Capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input With 3.3-V Supply
Mobile Phones and Wireless Devices
DB PACKAGE
(TOP VIEW)
Designed to Be Interchangeable With Maxim™
MAX3227
READY
C1+
V+
FORCEOFF
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
•
•
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
V
CC
GND
ESD Protection for RS-232 I/O Pins
– ±15 kV – Human-Body Model
C1−
C2+
C2−
V−
DOUT
FORCEON
DIN
– ±8 kV – IEC61000-4-2, Contact Discharge
– ±8 kV – IEC61000-4-2, Air-Gap Discharge
INVALID
ROUT
RIN
•
•
Auto-Powerdown Plus Feature Automatically
Disables Drivers for Power Savings
Packaged in Plastic Shrink Small-Outline
Package
DESCRIPTION/ORDERING INFORMATION
The MAX3227 consists of one line driver, one line receiver, and a dual charge-pump circuit with ±15-kV ESD
protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of
TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the
serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to
5.5-V supply. This device operates at data-signaling rates of 1 Mbit/s in normal operating mode and a maximum
of 30-V/µs driver output slew rate. This device also features a logic-level output (READY) that asserts when the
charge pump is regulating and the device is ready to begin transmitting.
The MAX3227 achieves a 1-µA supply current using the auto-powerdown plus feature. This device automatically
enters a low-power powerdown mode when the RS-232 cable is disconnected or the drivers of the connected
peripherals are inactive for more than 30 s. They turn on again when they sense a valid transition at any driver or
receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.
The MAX3227C is characterized for operation from 0°C to 70°C. The MAX3227I is characterized for operation
from –40°C to 85°C.
AVAILABLE OPTIONS
PACKAGED DEVICE
TA
SHRINK SMALL OUTLINE
(DB)(1)
0°C to 70°C
MAX3227CDB
MAX3227IDB
–40°C to 85°C
(1) The DB package is available taped and reeled. Add the suffix R to
device type (e.g., MAX3227CDBR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.