19-3455; Rev 0; 10/04
Single-/Dual-Band 802.11a/b/g
World-Band Transceiver ICs
General Description
Features
ꢀ World-Band Operation
The MAX2828/MAX2829 single-chip, RF transceiver ICs
are designed specifically for OFDM 802.11 WLAN appli-
cations. The MAX2828 is designed for single-band
802.11a applications covering world-band frequencies
of 4.9GHz to 5.875GHz. The MAX2829 is designed for
dual-band 802.11a/g applications covering world-bands
of 2.4GHz to 2.5GHz and 4.9GHz to 5.875GHz. The ICs
include all circuitry required to implement the RF trans-
ceiver function, providing a fully integrated receive path,
transmit path, VCO, frequency synthesizer, and base-
band/control interface. Only the PA, RF switches, RF
bandpass filters (BPF), RF baluns, and a small number
of passive components are needed to form the com-
plete RF front-end solution.
MAX2828: 4.9GHz to 5.875GHz (802.11a)
MAX2829: 2.4GHz to 2.5GHz and 4.9GHz to
5.875GHz (802.11a/b/g)
ꢀ Best-In-Class Transceiver Performance
-75dBm Rx Sensitivity at 54Mbps (802.11g)
-46dB (802.11g)/-51dB (802.11a) Tx Sideband
Suppression
1.5% (802.11g) and 2% (802.11a) Tx EVM
-100dBc/Hz (802.11g)/-95dBc/Hz (802.11a)
LO Phase Noise
Programmable Baseband Lowpass Filters
Integrated PLL with 3-Wire Serial Interface
93dB (802.11g)/97dB (802.11a) Receiver Gain-
Control Range
Each IC completely eliminates the need for external SAW
filters by implementing on-chip monolithic filters for both
the receiver and transmitter. The baseband filtering and
the Rx/Tx signal paths are optimized to meet the
802.11a/g IEEE standards and cover the full range of the
required data rates (6, 9, 12, 18, 24, 36, 48, and 54Mbps
for OFDM; 1, 2, 5.5, and 11Mbps for CCK/DSSS), at
receiver sensitivity levels up to 10dB better than 802.11a/g
standards. The MAX2828/MAX2829 transceivers are avail-
able in the small 56-pin, exposed paddle thin QFN pack-
age.
200ns Rx I/Q DC Settling
60dB Dynamic Range Rx RSSI
30dB Tx Power-Control Range
Tx/Rx I/Q Error Detection
I/Q Analog Baseband Interface for Tx and Rx
Digital Mode Selection (Tx, Rx, Standby, and
Power Down)
Supports Both Serial and Parallel Gain Control
ꢀ MIMO and Smart Antenna Compatibility
Coherent LO Phase Among Multiple
Transceivers
ꢀ Support 40MHz Channel Bandwidth (Turbo Mode)
ꢀ Single +2.7V to +3.6V Supply
ꢀ 1µA Low-Power Shutdown Mode
ꢀ Small 56-Pin TQFN Package (8mm x 8mm)
Applications
Single-/Dual-Band 802.11a/b/g Radios
4.9GHz Public Safety Radios
2.4GHz/5GHz MIMO and Smart Antenna Systems
Ordering Information
Pin Configurations
PART
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
TOP VIEW
MAX2828ETN
MAX2829ETN
*EP = Exposed paddle.
56 TQFN-EP* (T5688-2)
56 TQFN-EP* (T5688-2)
56 55 54 53 52 51 50 49 48 47 46 45 44 43
B6
1
2
42 RXHP
41 RXENA
40 RSSI
39 SHDN
V
V
CC
B7
3
N.C.
GND
4
5
38
CC
RXRFH
GND
6
37 BYPASS
36 TUNE
7
MAX2828
TXRFH+
TXRFH-
8
GND
GND
35
34
9
V
10
33 CPOUT
CC
N.C. 11
N.C. 12
GND
32
31
V
CC
TXENA 13
PABIAS 14
30 ROSC
29 LD
15 16 17 18 19 20 21 22 23 24 25 26 27 28
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.