Click here to ask about the production status of specific part numbers.
Evaluates: MAX14906
MAX14906 Evaluation Kit
General Description
Features
The MAX14906 evaluation kit (EV kit) provides a
proven design to evaluate the MAX14906, a four-channel
industrial digital-output, digital-input device. The EV kit allows
the MAX14906 to be configured on a per-channel basis
as either a digital output (in High-Side switch or Push-Pull
driver configuration) or a Type 1 and 3, or Type 2 digital
input. The EV kit monitors the MAX14906 diagnostic
information, including open-wire condition, state of the
output channels, multiple undervoltage alarms, global
and per-channel overtemperature alarms, and multiple
fault alarms.
● Easy Evaluation of the MAX14906 with Per-Channel
Configuration
● SafeDemagTM for Safe Turn-Off of Unlimited
Inductance in Digital Output Modes
● Configurable for IEC 61131-2 Type 1 and 3,
or Type 2 Digital Input
●
●
●
●
Support up to 3.75kV
Galvanic Isolation with
MAX14483 and MAX14937
RMS
Support Communicating with External Microcontroller
or FPGA
The EV kit must be powered from an external 24V DC
power supply that can provide up to 6.4A (max), when all
DOI_ output channels are fully loaded with the option of
2x load inrush current.
Allow Output Switching with High-Speed Parallel
Interface or SPI Serial Interface
®
Windows 10, Windows 8.1, and Windows 7
Compatible GUI Software
Proven PCB Layout
The MAX14906 EV kit communicates with a graphical
user interface (GUI) on a PC through a USB port. The EV
kit features an on-board FT2232 controller interfacing to
the MAX14906 control signals. Alternatively, an external
SPI interface from a microcontroller or FPGA can be used
through the 20-pin header (J13).
●
●
●
Fully Assembled and Tested
RoHS Compliant
Ordering Information appears at end of data sheet.
The MAX14906 EV kit comes with the MAX14906ATM+
installed in a 48-pin, 7mm x 7mm QFN package.
MAX14906 EV Kit Board Photo
SafeDemag™ is a trademark of Maxim Integrated Products, Inc.
®
Windows is a registered trademark of Microsoft Corporation.
319-100535; Rev 1; 3/21