EVALUATION KIT AVAILABLE
MAX14578E/MAX14578AE
USB Battery Charger Detectors
General Description
Features
S Compliant to USB Battery Charging Revision 1.1
The MAX14578E/MAX14578AE are USB charger detec-
tors compliant with USB Battery Charging Revision 1.1.
The USB charger-detection circuitry detects USB stan-
dard downstream ports (SDPs), USB charging down-
stream ports (CDPs), or dedicated charger ports (DCPs),
and controls an external lithium-ion (Li+) battery charger.
S Data Contact Detection for Foolproof Connector
Insertion Detection
S USB Dead-Battery Charging Support
S Charging Downstream Detection
S Apple/Sony Charger Detection
The devices implement USB Battery Charging Revision
1.1-compliant detection logic including data contact
detection, D+/D- short detection, charging downstream
port identification, and optional USB dead-battery charg-
ing support. Dead-battery charging support features a
45-minute (max) charge timer and weak battery voltage
S Dedicated Charger Detection
S China YD/T1591-Compliant Charger Detection
S Internal Switches Isolate the USB Transceiver
During the Charger Detection Process
2
monitor controlled by I C communication (MAX14578E
S V
Connection Capable of 28V
BUS
only.) The MAX14578AE features an enable (EN) input
S Device Status Change Interrupt
S Low Supply Current
and an LDO output.
In addition, the internal USB switch is compliant to
Hi-Speed USB, full-speed USB, and low-speed USB
signals. The devices feature low on-resistance, low
on-resistance flatness, and very low capacitance. The
devices also feature high-ESD protection up to Q15kV
Human Body Model on the CD+ and CD- pins.
S High-ESD Protection on CD+ and CD-
15ꢀV Human Body ꢁodel
8ꢀV IEC ꢂ1ꢃꢃꢃ-ꢄ-2 Contact Discharge
Applications
DSC and Camcorder
Media Players
In addition, the MAX14578E/MAX14578AE feature Apple
and Sony charger detection that allows identification of
resistor-divider networks on D+/D-.
Cell Phones
The MAX14578E/MAX14578AE are available in both a
12-bump, 0.4mm pitch, 1.3mm x 1.68mm WLP package
and 16-pin TQFN package, and operate over the -40NC
to +85NC extended temperature range.
e-Book Readers
Mobile Internet Devices (MIDs)
Ordering Information/Selector Guide
2
PART
I C
Yes
Yes
No
LDO
No
TEꢁP RANGE
-40NC to +85NC
-40NC to +85NC
-40NC to +85NC
-40NC to +85NC
PIN-PACKAGE
12 WLP
TOP ꢁARK
+ABW
AJA
EN
No
ꢁAX1ꢄ578EEWC+T
MAX14578EETE+T
ꢁAX1ꢄ578AEEWC+T
MAX14578AEETE+T
No
No
16 TQFN-EP*
12 WLP
Yes
Yes
Yes
Yes
+ABX
No
16 TQFN-EP*
AJB
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
T = Tape and reel.
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
19-5821; Rev 2; 9/12