19-4459; Rev 0; 2/09
Overvoltage Protection with USB Charger
Detection, LDO, and ESD Protection on D+/D-
29/MAX14530E
General Description
Features
The MAX14529E/MAX14530E are overvoltage-protec-
tion devices with USB charger detection, a low-dropout
(LDO) regulator, and ESD protection. These devices
♦ Input Voltage Protection Up to 28V
♦ High-Current USB Charger Detection
♦ 3.3V, 100mA LDO
feature a low 35mΩ (typ) R
internal FET switch and
ON
protect low-voltage systems against voltage faults up to
28V. When the input voltage exceeds the overvoltage
threshold, the internal FET switch is turned off to pre-
vent damage to the protected components.
♦ Preset Overvoltage Protection Trip Level
5.75V (MAX14529E)
6.8V (MAX14530E)
♦ Integrated Low R
35mΩ (typ) FET Switch
ON
The charger detection detects a short between the USB
D+ and D- data lines. If the data lines are shorted
together and a dedicated charger is attached, the
phone draws more than 500mA to charge the battery.
♦ Low-Capacitance USB High-Speed Data Line ESD
Protection (3pF)
15ꢀV Human Body Model (HBM)
15ꢀV IEC 61000-4-2 Air ꢁap
8ꢀV IEC 61000-4-2 Contact
The overvoltage thresholds (OVLO) are preset to 5.75V
(MAX14529E) or 6.8V (MAX14530E).
♦ Thermal-Shutdown Protection
The LDO output (LOUT) is powered from OUT and sup-
plies 3.3V to the USB transceiver. The LDO features a
100mA (min) current capability and low output noise.
♦ 12-Bump, 1.5mm x 2mm WLP Pacꢀage
♦ -40°C to +85°C Operating Temperature Range
The MAX14529E/MAX14530E feature 15ꢀV ꢁBM ESD
protection with low (3pF) capacitance suitable for
ꢁi-Speed USB 2.0.
Ordering Information/
Selector Guide
Both devices are offered in a small 12-bump, 1.5mm x
2mm WLP pacꢀage and operate over the -40°C to
+85°C extended temperature range.
PIN-
PACKAꢁE
PART
TOP MARK OVLO (V)
MAX14529EEWC+T 12 WLP
MAX14530EEWC+T 12 WLP
AAP
AAQ
5.75
6.8
Applications
Cell Phones
Note: Both devices are specified over the -40°C to +85°C oper-
ating temperature range.
+Denotes a lead(Pb)-free/RoꢁS-compliant pacꢀage.
T = Tape and reel.
MP3 Players
PDAs and Palmtop Devices
Typical Operating Circuit
Pin Configuration
TOP VIEW
(BUMPS ON BOTTOM)
PHONE
LOAD
IN
OUT
OUT
CHARGER
0.1μF
1
2
3
4
V
BUS
IN
D+
D-
D+
D-
USB
CONNECTOR
+
MAX14529E/MAX14530E
V
IO
V
IO
MAX14529E/
MAX14530E
A
B
C
10kΩ
10kΩ
IN
IN
VOK
CDET
LOUT
D-
GND
D+
VOK
CDET
OEN
MICRO-
PROCESSOR
LEN
OEN
OUT
LEN
OUT
V
CC
LOUT
GND
1.5kΩ
V
PU
1μF
USB 2.0
TRANSCEIVER
D+
D-
WLP
1.5mm x 2mm
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.