19-5254; Rev 1; 11/10
RS-485 Transceivers with Integrated
100Ω/120Ω Termination Resistors
General Description
Features
S 100I/120I Pin-Selectable Internal Termination
The MAX13450E/MAX13451E are half-duplex and full-
duplex RS-485/RS-422 transceivers. These devices fea-
ture internal 100I and 120I termination resistors. The
resistor values are pin selectable. A logic supply input
allows interfacing to logic levels down to +1.8V.
Resistors
S Driver Drives 100I Double Termination
S 20Mbps (max) Data Rate
S Pin-Selectable Slew-Rate Limiting
The MAX13450E/MAX13451E feature strong drivers
specified to drive low-impedance lines found when a
fully loaded bus, based on today’s 100I characteristic
impedance cable, is doubly terminated. Both devices
allow slew-rate limiting of the driver output to reduce EMI
and reflections for data rates up to 500kbps.
S Logic Supply Input Allows Interfacing Down to 1.8V
S Driver Fault-Indication Output (MAX13451E)
S Inverting of A, B Line Polarity (MAX13451E)
S High-Impedance Driver Output/Receiver Input
When V
Supply is Removed
CC
The MAX13451E has a FAULT alarm indication output to
signal to the system that an error condition exists in the
driver. The MAX13451E also features a logic inversion
function. The logic inversion allows phase reversal of the
A-B signals in case these are inadvertently connected
wrongly.
S Hot-Swap Input Structure on DE, RE, and TERM
S Extended ESD Protection
±30ꢀV Human Body Model
±15ꢀV Air Gap Discharge per IEC 61000-4-2
±±ꢀV Contact Discharge per IEC 61000-4-2
The MAX13450E/MAX13451E have 1/8-unit load receiver
input impedance, allowing up to 256 transceivers on the
bus. All driver outputs are protected to Q30kV ESD using
the Human Body Model (HBM).
S 1/8-Unit Load Allows Up to 256 Transceivers on
the Bus
S Thermal and Overcurrent Protected
S Fail-Safe Receivers
The MAX13450E/MAX13451E are available in a 14-pin
TSSOP package and operate over the automotive -40NC
to +125NC temperature range.
S +4.5V to +5.5V Supply Voltage Range
Functional Diagram (MAX13451E)
Applications
Industrial Control Systems
Portable Industrial Equipment
Motor Control
V
V
CC
L
SRL
INV
MAX13451E
Security Networks
DI
D
Medical Networks
FAULT
DE
Ordering Information/
Selector Guide
B
TERM
LOGIC
HALF/FULL
PART
PIN-PACKAGE
LOGIC-LEVEL
TRANSLATION
DUPLEX
MAX13450EAUD+
MAX13451EAUD+
Full
14 TSSOP-EP*
14 TSSOP-EP*
Half
RE
A
Note: All devices are specified over the -40°C to +125°C
operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
RO
TERM100
GND
_______________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.