19-3447; Rev 1; 2/05
14-Bit, 95Msps, 3.3V ADC
General Description
Features
ꢀ Direct IF Sampling Up to 400MHz
The MAX12555 is a 3.3V, 14-bit, 95Msps analog-to-digital
converter (ADC) featuring a fully differential wideband
track-and-hold (T/H) input amplifier, driving a low-noise
internal quantizer. The analog input stage accepts single-
ended or differential signals. The MAX12555 is optimized
for high dynamic performance, low power, and small
size. Excellent dynamic performance is maintained from
baseband to input frequencies of 175MHz and beyond,
making the MAX12555 ideal for intermediate-
frequency (IF) sampling applications.
ꢀ Excellent Dynamic Performance
74dB/72dB SNR at f = 3MHz/175MHz
IN
87.4dBc/76.2dBc SFDR at f = 3MHz/175MHz
IN
ꢀ Low Noise Floor: 74.6dBFS
ꢀ 3.3V Low-Power Operation
465mW (Single-Ended Clock Mode)
497mW (Differential Clock Mode)
300µW (Power-Down Mode)
Powered from a single 3.3V supply, the MAX12555 con-
sumes only 497mW while delivering a typical 72dB sig-
nal-to-noise ratio (SNR) performance at a 175MHz input
frequency. In addition to low operating power, the
MAX12555 features a 300µW power-down mode to
conserve power during idle periods.
ꢀ Fully Differential or Single-Ended Analog Input
ꢀ Adjustable Full-Scale Analog Input Range
0.35V to 1.10V
ꢀ Common-Mode Reference
A flexible reference structure allows the MAX12555 to use
the internal 2.048V bandgap reference or accept an
externally applied reference. The reference structure
allows the full-scale analog input range to be adjusted
from 0.35V to 1.10V. The MAX12555 provides a com-
mon-mode reference to simplify design and reduce exter-
nal component count in differential analog input circuits.
The MAX12555 supports either a single-ended or differ-
ential input clock. Wide variations in the clock duty
cycle are compensated with the ADC’s internal duty-
cycle equalizer (DCE).
ꢀ CMOS-Compatible Outputs in Two’s Complement
or Gray Code
ꢀ Data-Valid Indicator Simplifies Digital Interface
ꢀ Data Out-of-Range Indicator
ꢀ Miniature, 6mm x 6mm x 0.8mm 40-Pin Thin QFN
Package with Exposed Paddle
ꢀ Evaluation Kit Available (Order MAX12555EVKIT)
ADC conversion results are available through a 14-bit,
parallel, CMOS-compatible output bus. The digital out-
put format is pin selectable to be either two’s comple-
ment or Gray code. A data-valid indicator eliminates
external components that are normally required for reli-
able digital interfacing. A separate digital power input
accepts a wide 1.7V to 3.6V supply, allowing the
MAX12555 to interface with various logic levels.
Ordering Information
PART*
PIN-PACKAGE
40 Thin QFN
40 Thin QFN
PKG CODE
T4066-3
MAX12555ETL
MAX12555ETL+
T4066-3
+Denotes lead-free package.
*All devices specified over the -40°C to +85°C operating range.
The MAX12555 is available in a 6mm x 6mm x 0.8mm,
40-pin thin QFN package with exposed paddle (EP),
and is specified for the extended industrial (-40°C to
+85°C) temperature range.
See the Pin-Compatible Versions table for a complete
family of 14-bit and 12-bit high-speed ADCs.
Pin-Compatible Versions
SAMPLING
RESOLUTION
(BITS)
TARGET
PART
RATE
(Msps)
APPLICATION
MAX12555
MAX12554
MAX12553
MAX19538
MAX1209
MAX1211
MAX1208
MAX1207
MAX1206
95
80
65
95
80
65
80
65
40
14
14
14
12
12
12
12
12
12
IF/Baseband
IF/Baseband
IF/Baseband
IF/Baseband
IF
Applications
IF and Baseband Communication Receivers
Cellular, Point-to-Point Microwave, HFC, WLAN
Medical Imaging Including Positron Emission
Tomography (PET)
Video Imaging
IF
Portable Instrumentation
Low-Power Data Acquisition
Baseband
Baseband
Baseband
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.