MAAP-011218-DIE
0.5 W Power Amplifier
71 - 86 GHz
Rev. V2
Features
Functional Schematic
4 Stage Power Amplifier for E-Band
20 dB Gain
8 dB Input and Output Match
27 dBm Saturated Output Power
31 dBm OIP3
Variable Gain with Adjustable Bias
Integrated Detector
2790 × 1950 × 50 µm Bare Die
RoHS* Compliant
VD1
VD2 VD3 VD4
17
16
15
14
1
2
3
13
12
11
GND
RFIN
GND
GND
RFOUT
GND
Description
The MAAP-011218 is a bare die power amplifier that
operates from 71 - 86 GHz. The amplifier provides
20 dB small signal gain, 27 dBm output power and
31 dBm Output Third Order Intercept Point (OIP3).
An integrated temperature compensated power
detector is on-chip. The input and output are
matched to 50 Ω with bond wires to external board.
4
5
6
7
8
9
10
VG1
VG3
REF
VG2
VG4 VD4
DET
Bond-pad Configuration
This amplifier is designed for use as a power
amplifier stage in transmit chains and is ideally
suited for E-band point-to-point radios. Each device
is 100% RF tested to ensure performance
compliance.
Pin #
Function
Ground2
RFIN
Pin #
10
Function
DET
1
2
3
4
5
6
7
8
9
11
Ground2
RFOUT
Ground2
VD4
Ground2
VG1
12
13
VG2
14
VG3
15
VD3
Ordering Information
VG4
16
VD2
Part Number
MAAP-011218-DIE
1. Die quantity varies.
Package
VD4
17
VD1
Vacuum Release Gel Pak1
REF
18
Ground3
2. These pads are internally connected to ground.
3. The backside of the die must be connected to RF, DC and
thermal ground.
* Restrictions on Hazardous Substances, compliant to current RoHS EU directive.
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
DC-0009861