是否无铅: | 不含铅 | 生命周期: | Active |
零件包装代码: | TSSOP | 包装说明: | TSSOP-16 |
针数: | 16 | Reach Compliance Code: | compliant |
HTS代码: | 8542.39.00.01 | Factory Lead Time: | 45 weeks |
风险等级: | 5.71 | 模拟集成电路 - 其他类型: | SINGLE-ENDED MULTIPLEXER |
JESD-30 代码: | R-PDSO-G16 | JESD-609代码: | e4 |
长度: | 5 mm | 湿度敏感等级: | 1 |
信道数量: | 2 | 功能数量: | 3 |
端子数量: | 16 | 标称断态隔离度: | 50 dB |
通态电阻匹配规范: | 30 Ω | 最大通态电阻 (Ron): | 190 Ω |
最高工作温度: | 125 °C | 最低工作温度: | -55 °C |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | TSSOP |
封装等效代码: | TSSOP16,.25 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | 峰值回流温度(摄氏度): | NOT SPECIFIED |
座面最大高度: | 1.2 mm | 最大供电电压 (Vsup): | 12 V |
最小供电电压 (Vsup): | 2 V | 标称供电电压 (Vsup): | 4.5 V |
表面贴装: | YES | 最长断开时间: | 220 ns |
最长接通时间: | 345 ns | 技术: | CMOS |
温度等级: | MILITARY | 端子面层: | Nickel/Palladium/Gold (Ni/Pd/Au) |
端子形式: | GULL WING | 端子节距: | 0.65 mm |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | NOT SPECIFIED |
宽度: | 4.4 mm | Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
M74HCT4053B1R | STMICROELECTRONICS |
获取价格 |
TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER | |
M74HCT4053M1R | STMICROELECTRONICS |
获取价格 |
TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER | |
M74HCT4053RM13TR | STMICROELECTRONICS |
获取价格 |
TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER | |
M74HCT4053TTR | STMICROELECTRONICS |
获取价格 |
TRIPLE 2-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER | |
M74HCT4066ADTR2G | ONSEMI |
获取价格 |
四路模拟开关/多工器/信号分离器/带 LSTTL 兼容输入 | |
M74HCT4094ADTR2G | ONSEMI |
获取价格 |
8-Bit Shift and Store Register with LSTTL Compatible Inputs | |
M74HCT4851ADTR2G | ONSEMI |
获取价格 |
Analog Multiplexers/ Demultiplexers with Injection Current Effect Control with LSTTL Compa | |
M74HCT4851ADWR2G | ONSEMI |
获取价格 |
Analog Multiplexers/ Demultiplexers with Injection Current Effect Control with LSTTL Compa | |
M74HCT4852ADTR2G | ONSEMI |
获取价格 |
Analog Multiplexers/ Demultiplexers with Injection Current Effect Control with LSTTL Compa | |
M74HCT533 | STMICROELECTRONICS |
获取价格 |
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT HCT373 NON INVERTING - HCT533 INVERTING |