MODEL: M6DPP
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
[3] OUTPUT LOGIC
N: The same as the input
R: Inverted
PULSE ISOLATOR
Functions & Features
• 5.9-mm wide ultra-slim design
• Low profile allows the M6D module mounted in a 120-mm
deep panel
POWER INPUT
DC Power
R: 24 V DC
• Galvanically isolates pulse rate signals
• High-density mounting
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Power indicator and input monitor LED
[4] OPTIONS
blank: none
Typical Applications
/Q: With options (specify the specification)
• Isolating field pulse signals in order to reduce noises
• Changing e.g. dry contact signal to e.g. 5 V signals
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
5.9 (.23)
/C02: Polyurethane coating
94
(3.70)
GENERAL SPECIFICATIONS
Connection
Input and output: Euro terminal (torque 0.3 N·m)
Power input: Via the Installation Base (model: M6DBS)
or Euro terminal (torque 0.3 N·m)
102
(4.02)
mm (inch)
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Chattering protection: Filter provided for mechanical
contact input
MODEL: M6DPP–[1][2][3]–R[4]
Power LED: Green light turns on when the power is supplied.
Input monitor LED
ORDERING INFORMATION
• Code number: M6DPP-[1][2][3]-R[4]
Specify a code from below for each [1] through [4].
(e.g. M6DPP-CMN-R/Q)
Open collector, Mechanical contact: Orange LED turns
on when the input is ON.
Voltage pulse, 2-wire current pulse: Orange LED turns
on when the input is high.
• Specify the specification for option code /Q
(e.g. /C01)
Input pulse sensing: DC coupled
INPUT SPECIFICATIONS
Excitation: 12 V DC @20 mA, shortcircuit protection
■ Open Collector
[1] INPUT
A1: Open collector
A2: Mechanical contact
C: 5 V pulse (sensitivity 2 V)
D: 12 V/24 V pulse (sensitivity 5 V)
H: Two-wire current pulse
Maximum frequency: 100 kHz
Pulse width time requirement: ≥ 5 μsec. for ON and OFF
Sensing: Approx. 11 V DC @2.4 mA
Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF
■ Mechanical Contact
[2] OUTPUT
Maximum frequency: 30 Hz
A1: High frequency open collector (max. 100 kHz)
A2: Low frequency open collector (max. 30 Hz)
M: 5 V pulse
Pulse width time requirement: ≥ 10 msec. for ON and OFF
Sensing: Approx. 11 V DC @2.4 mA
Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF
■ Voltage Pulse
N: 12 V pulse
P: 24 V pulse
Maximum frequency: 100 kHz
M6DPP SPECIFICATIONS
ES-7852 Rev.6 Page 1/4
http://www.m-system.co.jp/