INCH-POUND
MIL-M-38510/113B
21 June 2005
SUPERSEDING
MIL-M-38510/113A
10 February 2005
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, 8 BIT, DIGITAL-TO-ANALOG CONVERTERS, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Reactivated for new design as of 10 February 2005. May be used for either new or existing design acquisition.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, 8 bit, digital-to-analog
converters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each
type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been
superseded by MIL-PRF-38535, (see 6.4)
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type
Circuit
01
02
D/A Converter, 8 bit, 0.19% linearity
D/A Converter, 8 bit, 0.10% linearity
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
E
Descriptive designator
Terminals
16
Package style
Dual-in-line
GDIP1-T16 or CDIP2-T16
1.3 Absolute maximum ratings.
Supply voltage [+VCC – (-VCC)] ......................................................... 36 Vdc
Voltage, digital input to negative supply [Vlogic – (-VCC)] ................... 0 to 36 Vdc
Voltage, logic control (VLC) ............................................................... -VCC to +VCC
Reference voltage input (V14, V15) .................................................... -VCC to +VCC
Reference input current (I14) ............................................................ 5.0 mA
Reference input differential voltage [(V14 – V15)] .............................. ±18 Vdc
Lead temperature (soldering, 60 sec) ............................................. +300°C.
Junction temperature (TJ) ................................................................ +175°C
Storage temperature ........................................................................ -65°C to +150°C
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense
Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed
to mailto:linear@dscc.dla.mil . Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at http://assist.daps.dla.mil .
AMSC N/A
FSC 5962