MODEL: M2VF3
-55 – +55 V DC
Super-mini Signal Conditioners Mini-M Series
-60 – +60 V DC
-300 – +300 V DC *
-350 – +350 V DC *
-400 – +400 V DC *
-600 – +600 V DC *
-800 – +800 V DC *
SIGNAL TRANSMITTER
(high-accuracy, ultra-high speed response 30 μsec.)
Functions & Features
• Converts DC input from a sensor into a standard process
signal
* Select ‘/N’ for ‘Standards & Approvals’ code.
Multiple installation bases are unable.
• Frequency characteristics 12 kHz (-3 dB)
• 30-microsecond response
OUTPUT
Typical Applications
Voltage
• Isolation for a vibration analyzing system
• Isolation for Discharge/Charge tester
4W: -10 – +10 V DC (Load resistance 2000 Ω min.)
POWER INPUT
23 (.91)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Model
76
(2.99)
[2] OPTIONS (multiple selections)
Standards & Approvals (must be specified)
/N: Without CE
ZERO
SPAN
124
(4.88)
mm (inch)
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
MODEL: M2VF3–[1]4W–R[2]
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ORDERING INFORMATION
• Code number: M2VF3-[1]4W-R[2]
Specify a code from below for each of [1] and [2].
(e.g. M2VF3-04W-R/CE/Q)
/C02: Polyurethane coating
/C03: Rubber coating
• Special input range (For code 0: e.g. -164 – +164 mV DC)
• Specify the specification for option code /Q
(e.g. /C01/S01)
TERMINAL SCREW MATERIAL
/S01: Stainless steel
GENERAL SPECIFICATIONS
Construction: Plug-in
[1] INPUT
Voltage
Connection: M3 screw terminals (torque 0.8 N·m)
Screw terminal: Chromated steel (standard) or stainless
steel
2W: -100 – +100 mV DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
8W: -20 – +20 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (Select input range as indicated below)
-20 – +20 mV DC
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Overrange input: -5 to +105 %
Zero adjustment: -1 to +1 %; multi-turn screwdriver
adjustments (front)
-24 – +24 mV DC
-40 – +40 mV DC
Span adjustment: 99 to 101 %; multi-turn screwdriver
adjustments (front)
-85 – +85 mV DC
-164 – +164 mV DC
Power LED: Green LED turns on when the power is supplied.
-200 – +200 mV DC
-15 – +15 V DC
-25 – +25 V DC
M2VF3 SPECIFICATIONS
ES-5107 Rev.7 Page 1/3
http://www.m-system.co.jp/