SPECIFICATION FOR HCMOS/TTL COMPATIBLE SMT OSCILLATOR
MtronPTI P/N M2002S894
Electrical Specifications:
Parameter
Symbol
Min.
Typ.
Max.
Units
Conditions
Frequency of Operation
FO
25.000000
MHz
Stability Includes: (initial
frequency, deviation over
the operating temperature
range, shift due to shock,
vibration, 10 year aging,
load and supply variations)
Frequency Stability
-50
+50
ppm
F/F
Operating Temperature
Storage Temperature
TA
TS
-55
-65
-3
-1
3.135
+105
+125
+3
+1
3.465
20
°C
°C
ppm
ppm
V
1st year
Thereafter (per year)
Aging
Operating Voltage
Operating Current
Output Type
VDD
IDD
3.3
mA
HCMOS/TTL Compatible
15/2
Output Load
pF/TTL
Symmetry (duty cycle)
Logic “1” Level
TDC
VOH
VOH
VOL
VOL
TR/TF
RJ
45
90% VDD
VDD – 0.5
55
%
V
V
V
Ref to ½ VDD
HCMOS load
TTL Load
HCMOS load
TTL Load
Logic “0” Level
10% VDD
0.5 V
6
Rise/Fall Time
Random Jitter
Start-up Time
ns
ps RMS
ms
From 10% to 90% VDD
1-Sigma
4
10
10
TSU
Logic “1” enables output.
Logic “0” disables output to a Hi-Z.
Tri-state Function
Pad1
Environmental & Mechanical Requirements:
Mechanical Shock
Vibration
Thermal Cycle
Fine Leak Test
Gross Leak Test
Solderability
Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms duration, ½ sinewave)
Per MIL-STD-202, Method 201 & 204 (10 g’s from 10-2000 Hz)
Per MIL-STD-883, Method 1010, B (-55°C to 125°C, 15 min. dwell, 10 cycles)
Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium)
Per MIL-STD-202, Method 112 (30 second immersion)
Per EIAJ-STD-002
Max. Soldering Conditions
Package Type
See solder profile, Figure 1
4-pad 5 X 7 mm leadless ceramic. Sn-Pb solder tinned pads.
Special Requirements:
1. All units 100% electrical test over –55°C to +105°C and at +25°C.
2. Domestic USA build only.
1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without written permission from MtronPTI.