MODEL: M1EXS-2
2 Channel Super-mini Signal Conditioners
with Display M1E-2 Series
OUTPUT – Field-selectable
◆ DC Output
• Current output: 0 - 20 mA DC
• Voltage output: -5 - +5 V DC
• Voltage output: -10 - +10 V DC
SELF-SYNCH TRANSMITTER
(2 channels, PC programmable)
Functions & Features
POWER INPUT
AC Power
• Converts position signals from a self-synchronizing motor
into a DC signal proportional to the rotating shaft position
• 2 channels
K3: 100 – 120V AC
(Operational voltage range 85 - 132 V, 47 - 66 Hz)
• Adjustments with the front buttons
• OEL display with good visibility
• Linearization available for each channel (111 points)
[1] OPTIONS
blank: none
Typical Applications
/Q: With options (specify the specification)
• Position indicator using self-synch
• Tank gauge
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Sounding level meter
36 (1.42)
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-5986)
99
(3.90)
RELATED PRODUCTS
• Installation base (model: M1E-BS2)
• M1E configurator software (model: M1ECFG)
Downloadable at M-System’s web site.
125 (4.92)
mm (inch)
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual (EM-5981) for the M1E configurator for
applicable cable types.
Note: The !gure shows the combination
of the unit and the base.
MODEL: M1EXS-2–K3[1]
GENERAL SPECIFICATIONS
Construction: Plug-in
ORDERING INFORMATION
• Code number: M1EXS-2-K3[1]
Specify a code from below for [1].
(e.g. M1EXS-2-K3/Q)
Connection
• Connected to base with connector
• Base
M2.6 screw terminals (torque: 0.5 N·m)
Applicable solderless terminal size (M3)
Screw terminal: Nickel-plated steel
• Specify the specification for option code /Q
(e.g. /C01/SET)
Housing material: Flame-resistant resin (black)
Isolation: Ch1.input to ch2.input to Ch1.output to ch2.output
to power
NO. OF CHANNELS
2: 2 channels
Overrange output: Approx. -5 to +105 % (Not available for
current output not greater than 0 mA)
Output zero fine adj. range: -5 to +5% (front button)
Output span fine adj. range: 95 to 105% (front button)
Configuration: Program with front buttons or Via PC.
Programmable features include: Refer to the parameter list.
INPUT
Self-synch signal
M1EXS-2 SPECIFICATIONS
ES-5986 Rev.2 Page 1/7
https://www.m-system.co.jp/