MODEL: M1EAXV-2
2 Channel Super-mini Signal Conditioners
with Display M1E-2 Series
NO. OF CHANNELS
2: 2 channels
INPUT – Field-selectable
◆ DC Input
DC ALARM
(2 channels, PC programmable, dual or quad alarm trip)
• Current input: 0 - 50 mA DC
• Voltage input: -1000 - +1000 mV DC
• Voltage input: -10 - +10 V DC
Functions & Features
• Provides relay outputs at preset DC input levels
• Quad or dual trip
• 2 Channels
• Front LCD display indicating values in scaled engineering
unit range is used to program the module
• Adjustable deadband (hysteresis)
• ON delay time selectable
[1] OUTPUT
2: 4 points; N.O. or make contact
3: 4 points; N.C. or break contact
5: 2 points; SPDT or transfer contact
• Hi/Lo trip and energized/de-energized coil independently
selectable for each setpoint
POWER INPUT
• Settable with front buttons
DC Power
• Enclosed relays
R: 24 V DC
• Relays can be powered by 200 V AC and 100 V DC
• High-density mounting on DIN rail
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Typical Applications
• Annunciator
[2] OPTIONS
blank: none
• Various alarm applications
/Q: With options (specify the specification)
36 (1.42)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
99
(3.90)
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-5995)
125 (4.92)
RELATED PRODUCTS
mm (inch)
• Installation base (model: M1E-BS2)
Note: The !gure shows the combination
of the unit and the base.
• M1EA configurator software (model: M1EACFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual (EM-5994) for the M1EA configurator for
applicable cable types.
MODEL: M1EAXV–2-[1]-R[2]
ORDERING INFORMATION
• Code number: M1EAXV-2-[1]-R[2]
Specify a code from below for each of [1] and [2].
(e.g. M1EAXV-2-2-R/Q)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection
• Specify the specification for option code /Q
(e.g. /C01/SET)
• Connected to base with connector
• Base
M2.6 screw terminals (torque: 0.5 N·m)
Applicable solderless terminal size (M3)
Screw terminal: Nickel-plated steel
M1EAXV-2 SPECIFICATIONS
ES-5995 Rev.2 Page 1/10
https://www.m-system.co.jp/