Ordering number : ENA1416C
Bi-CMOS IC
For Polygon Mirror Motor
LV8111V
3-phase Brushless Motor Driver
Overview
The LV8111V is a 3-phase brushless motor driver for polygon mirror motor driving of LBP.
A circuit needed to drive of polygon mirror motor can be composed of a single-chip. Also, the output transistor is made
DMOS by using BiDC process, and by adopting the synchronous rectification method, the lower power consumption
(Heat generation) is achieved.
Features
• 3-phase bipolar drive
• Full complement of on-chip protection circuits, including lock
protection, current limiter, under-voltage protection, and thermal
shutdown protection circuits
• Circuit to switch slowing down method while stopped
(Free run or Short-circuit brake)
• Direct PWM drive + synchronous rectification
• I max1 = 2.5A
O
• I max1 = 3.0A (t ≤ 0.1ms)
O
• Output current control circuit
• PLL speed control circuit
• Constraint protection detection signal switching circuit (FG or LD)
• Phase lock detection output (with mask function) • Forward / Reverse switching circuit
• Compatible with Hall FG
• Hall bias pin (Bias current cut in a stopped state)
• SDCC (Speed Detection Current Control) function
• Provides a 5V regulator output
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Supply voltage
V
max
V
pin
CC
37
42
CC
VG max
VG pin
*1
V
Output current
I
I
max1
max2
2.5
A
O
O
t ≤ 0.1ms *1
3.0
A
Allowable Power dissipation
Operation temperature
Storage temperature
Pd max
Topr
Mounted on a specified board *2
1.7
W
°C
°C
°C
-25 to +80
-55 to +150
150
Tstg
Junction temperature
Tj max
*1. Tj max = 150°C must not be exceeded.
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
31412 SY 20120224-S00003 / O1409 SY 20090916-S00007 / 60309 MS 20090521-S00002 / 22509 MS 20090212-S00001 No.A1416-1/13