5 mm (T1 3/4) MULTILED®, Diffused
LU 5351
Besondere Merkmale
● nicht eingefärbtes, teilweise diffuses Gehäuse
● Lötspieße im 2.54 mm Raster
● hohe Signalwirkung durch Farbwechsel der LED möglich
● Anzeige unterschiedlicher Betriebszustände durch Farb-
wechsel grün über gelb und orange bis rot möglich
● beide Farben getrennt ansteuerbar
● Lötspieße mit Aufsetzebene
● gegurtet lieferbar
● Störimpulsfest nach DIN 40839
Features
● colorless, partly diffused package
● 2.54 mm lead spacing
● high signal efficiency possible by color change of the LED
● indication of different operation modes is possible by color
change from green to yellow, orange and super-red
● both colors can be controlled separately
● solder leads with stand-off
● available taped on reel
● load dump resistant acc. to DIN 40839
Typ
Type
Emissionsfarbe Gehäusefarbe
Lichtstärke
Luminous
Intensity
Bestellnummer
Ordering Code
Color of
Color of
Package
Emission
IF = 10 mA
IV (mcd)
LU 5351-GL
LU 5351-JM
super-red / green colorless clear,
1.6 … 20
4.0 … 32
Q62703-Q2046
Q62703-Q2047
diffused
super-red / green
Streuung der Lichtstärke in einer Verpackungseinheit IV max / IV min ≤ 2.0.1)
Streuung der Lichtstärke in einer LED IV max / IV min ≤ 4.0 (LU 5351-GL), ≤ 2.0 (LU 5351-JM).
1)
Bei MULTILED® bestimmt die Helligkeit des jeweils dunkleren Chips in einem Gehäuse die Helligkeitsgruppe
der LED.
Luminous intensity ratio in one packaging unit IV max / IV min ≤ 2.0.1)
Luminous intensity ratio in one LED IV max / IV min ≤ 4.0 (LU 5351-GL), ≤ 2.0 (LU 5351-JM).
1)
In case of MULTILED®, the brightness of the darker chip in one package unit determines the brightness group
of the LED.
Semiconductor Group
1
11.96