LTC2415/LTC2415-1
24-Bit No Latency ∆ΣTM
ADCs with Differential Input and
Differential Reference
U
DESCRIPTIO
FEATURES
The LTC®2415/2415-1 are micropower 24-bit differential
∆Σ analog to digital converters with integrated oscillator,
2ppmINL, 0.23ppmRMSnoiseanda2.7Vto5.5Vsupply
range. They use delta-sigma technology and provide
single cycle settling time for multiplexed applications.
Through a single pin, the LTC2415 can be configured for
better than 110dB input differential mode rejection at
50Hz or 60Hz ±2%, or it can be driven by an external
oscillator for a user defined rejection frequency. The
LTC2415-1 can be configured for better than 87dB input
differential mode rejection over the range of 49Hz to
61.2Hz (50Hz and 60Hz ±2% simultaneously). The inter-
nal oscillator requires no external frequency setting com-
ponents.
■
2× Speed Up Version of the LTC2410/LTC2413:
15Hz Output Rate, 50Hz or 60Hz Notch—LTC2415;
13.75Hz Output Rate, Simultaneous 50Hz/60Hz
Notch—LTC2415-1
Differential Input and Differential Reference with
GND to VCC Common Mode Range
2ppm INL, No Missing Codes
2.5ppm Gain Error
0.23ppm Noise
Single Conversion Settling Time for Multiplexed
Applications
Internal Oscillator—No External Components
Required
■
■
■
■
■
■
■
24-Bit ADC in Narrow SSOP-16 Package
(SO-8 Footprint)
Single Supply 2.7V to 5.5V Operation
The converters accept any external differential reference
voltage from 0.1V to VCC for flexible ratiometric and
remote sensing measurement configurations. The full-
■
■
Low Supply CurrUent (200µA) and Auto Shutdown
scale differential input range is from –0.5VREF to 0.5VREF
.
APPLICATIO S
The reference common mode voltage, VREFCM, and the
input common mode voltage, VINCM, may be indepen-
dently set anywhere within the GND to VCC range of the
LTC2415/LTC2415-1. The DC common mode input rejec-
tion is better than 140dB.
■
Direct Sensor Digitizer
Weight Scales
Direct Temperature Measurement
Gas Analyzers
Strain Gage Transducers
Instrumentation
Data Acquisition
Industrial Process Control
■
■
■
■
The LTC2415/LTC2415-1 communicate through a flexible
3-wire digital interface which is compatible with SPI and
MICROWIRETM protocols.
, LTC and LT are registered trademarks of Linear Technology Corporation.
No Latency ∆Σ is a trademark of Linear Technology Corporation.
MICROWIRE is a trademark of National Semiconductor Corporation.
■
■
■
■
6-Digit DVMs
U
TYPICAL APPLICATIO S
V
CC
1µF
2.7V TO 5.5V
V
CC
1µF
= INTERNAL OSC/50Hz REJECTION (LTC2415)
2
14
= EXTERNAL CLOCK SOURCE
= INTERNAL OSC/60Hz REJECTION (LTC2415)
= INTERNAL 50Hz/60Hz REJECTION (LTC2415-1)
V
F
CC
LTC2415/
O
2
3
+
REF
V
12 SDO
13 SCK
11 CS
CC
LTC2415-1
BRIDGE
IMPEDANCE
100Ω TO 10k
5
+
3
4
IN
IN
3-WIRE
SPI INTERFACE
LTC2415/
+
13
REFERENCE
VOLTAGE
REF
REF
6
–
SCK
LTC2415-1
–
0.1V TO V
CC
–
4
3-WIRE
SPI INTERFACE
REF
GND
F
O
5
6
12
11
+
ANALOG INPUT RANGE
–0.5V TO 0.5V
IN
SDO
CS
1, 7, 8
9, 10,
15, 16
14
REF
REF
–
IN
1, 7, 8, 9, 10, 15, 16
2415 TA02
GND
2415 TA01
sn2415 24151fs
1