LTC1645
Dual-Channel Hot Swap
Controller/Power Sequencer
U
FEATURES
DESCRIPTIO
The LTC®1645 is a 2-channel Hot SwapTM controller that
allows a board to be safely inserted and removed from a
livebackplane. UsingexternalN-channelpasstransistors,
the supply voltages can be ramped at a programmable
rate. Two high side switch drivers control the N-channel
gates for supply voltages ranging from 1.2V to 12V. The
two channels can be set to ramp up and down separately,
ortheycanbeprogrammedtoriseandfallsimultaneously,
ensuring power supply tracking at the two outputs.
■
Allows Safe Board Insertion and Removal from a
Live Backplane
■
Programmable Power Supply Sequencing
■
Programmable Electronic Circuit Breaker
■
User-Programmable Supply Voltage Power-Up and
Power-Down Rate
■
High Side Drivers for External N-Channel FETs
■
Controls Supply Voltages from 1.2V to 12V
■
Ensures Proper Power-Up Behavior
Undervoltage Lockout
■
Programmable electronic circuit breakers protect against
shorts at either output. The RESET output can be used to
generate a system reset when a supply voltage falls below
a user-programmed voltage. An additional spare com-
parator is available for monitoring a second supply
voltage.
■
Glitch Filter Protects Against Spurious RESET Signals
8- and 14-Pin SO Packages
■
U
APPLICATIO S
■
Hot Board Insertion
■
TheLTC1645isavailableinthe8-and14-pinSOpackages.
Power Supply Sequencing
■
, LTC and LT are registered trademarks of Linear Technology Corporation.
Electronic Circuit Breaker
Hot Swap is a trademark of Linear Technology Corporation.
U
TYPICAL APPLICATIO
5V and 3.3V Hot Swap
5V and 3.3V Hot Swap Waveforms
V
3.3V
5A
0.005Ω*
IRF7413
OUT2
V
IN2
IN1
+
+
C
C
LOAD2
ON
5V/DIV
V
5V
5A
0.005Ω*
IRF7413
OUT1
V
10Ω
LOAD1
GATEn
10V/DIV
10Ω
0.01µF
25V
0.01µF
25V
VOUT2
5V/DIV
SENSE1 GATE1
V
SENSE2 GATE2
CC2
V
CC1
VOUT1
5V/DIV
LTC1645
(8-LEAD)
ON
ON
10k
GND
1645 TA01
GND
*LRF1206-01-R005-J (IRC)
BACKPLANE PLUG-IN CARD
1645fa
1