LTC1485
Differential Bus Transceiver
U
DESCRIPTIO
EATURE
ESD Protection over
Low Power: ICC = 1.8mA Typ
28ns Typical Driver Propagation Delays with
4ns Skew
Designed for RS485 or RS422 Applications
Single 5V Supply
–7V to 12V Bus Common-Mode Range Permits ±7V
Ground Difference Between Devices on the Bus
Thermal Shutdown Protection
Power-Up/Down Glitch-Free Driver Outputs
Driver Maintains High Impedance in Three-State or
with the Power Off
Combined Impedance of a Driver Output and
Receiver Allows up to 32 Transceivers on the Bus
60mV Typical Input Hysteresis
S
F
■
■
■
±
10kV
The LTC®1485 is a low power differential bus/line trans-
ceiverdesignedformultipointdatatransmissionstandard
RS485 applications with extended common-mode range
(12V to –7V). It also meets the requirements of RS422.
■
■
■
The CMOS with Schottky design offers significant power
savings over its bipolar counterpart without sacrificing
ruggedness against overload or ESD damage.
■
■
■
The driver and receiver feature three-state outputs, with
the driver outputs maintaining high impedance over the
entire common-mode range. Excessive power dissipation
caused by bus contention or faults is prevented by a
thermal shutdown circuit which forces the driver outputs
into a high impedance state. I/O pins are protected against
multiple ESD strikes of over ±10kV.
■
■
■
Pin Compatible with the SN75176A, DS75176A, and
SN75LBC176
The receiver has a fail-safe feature which guarantees a
high output state when the inputs are left open.
O U
BothACandDCspecificationsareguaranteedfrom– 40°C
to 85°C and 4.75V to 5.25V supply voltage range.
PPLICATI
S
A
■
Low Power RS485/RS422 Transceiver
Level Translator
, LTC and LT are registered trademarks of Linear Technology Corporation.
■
U
O
TYPICAL APPLICATI
5V
DE
5V
DE
3
8
3
8
LTC1485
LTC1485
6
7
6
4
1
4
1
120Ω
4000 FT 24 GAUGE TWISTED PAIR
DI
120Ω
DI
DRIVER
DRIVER
7
RO
RO
RECEIVER
RECEIVER
5
2
5
2
RE
RE
1485 TA01
1