Multi TOPLED®
LSG T677
Cathodes On One Side
Besondere Merkmale
● Gehäusebauform: P-LCC-4
● Gehäusefarbe: weiß
● als optischer Indikator einsetzbar
● zur Hinterleuchtung, Lichtleiter- und Linseneinkopplung
● beide Leuchtdiodenchips getrennt ansteuerbar
● hohe Signalwirkung durch Farbwechsel der LED möglich
● bei geeigneter Ansteuerung, Farbwechsel von grün über
gelb und orange bis super-rot möglich
● für alle SMT-Bestück- und Löttechniken geeignet
● gegurtet (8-mm-Filmgurt)
● Störimpulsfest nach DIN 40839
Features
● P-LCC-4 package
● color of package: white
● for use as optical indicator
● for backlighting, optical coupling into light pipes and lenses
● both chips can be controlled separately
● high signal efficiency possible by color change of the LED
● with appropriate controlling it is possible to change color from
green to yellow and orange to super-red
● suitable for all SMT assembly and soldering methods
● available taped on reel (8 mm tape)
● load dump resistant acc. to DIN 40839
Typ
Emissions- Farbe der Licht- Lichtstärke Lichtstrom Bestellnummer
farbe
Color of
Emission
austrittsfläche
Color of the
Light Emitting
Area
Type
Luminous
Intensity
IF = 10 mA
IV(mcd)
Luminous
Flux
IF = 10 mA
ΦV (mlm)
Ordering Code
LSG T677-HK super-red / colorless clear
2.5 ... 12.5
4.0 ... 8.0
6.3 ... 12.5
4.0 ... 20.0
-
Q62703-Q3370
Q62703-Q3371
Q62703-Q3372
Q62703-Q3373
LSG T677-J
LSG T677-K
LSG T677-JL
green
18 (typ.)
30 (typ.)
-
Streuung der Lichtstärke in einer Verpackungseinheit IV max / IV min ≤ 2.0.1)
Streuung der Lichtstärke in einer LED IV max / IV min ≤ 3.0.
1)
Bei MULTILED® bestimmt die Helligkeit des jeweils dunkleren Chips in einem Gehäuse die Helligkeitsgruppe
der LED.
Luminous intensity ratio in one packaging unit IV max / IV min ≤ 2.0.1)
Luminous intensity ratio in one LED IV max / IV min ≤ 3.0.
1)
In case of MULTILED®, the brightness of the darker chip in one package determines the brightness group of
the LED.
Semiconductor Group
1
11.96