5秒后页面跳转
LR8 PDF预览

LR8

更新时间: 2024-10-30 14:56:03
品牌 Logo 应用领域
美国微芯 - MICROCHIP /
页数 文件大小 规格书
18页 804K
描述
LR8 is a high voltage, low output current, adjustable linear regulator. It has a wide operating in

LR8 数据手册

 浏览型号LR8的Datasheet PDF文件第2页浏览型号LR8的Datasheet PDF文件第3页浏览型号LR8的Datasheet PDF文件第4页浏览型号LR8的Datasheet PDF文件第5页浏览型号LR8的Datasheet PDF文件第6页浏览型号LR8的Datasheet PDF文件第7页 
LR8  
High-Input Voltage, Adjustable, 3-Terminal,  
Linear Regulator  
Features  
General Description  
• 13.2-450V Input Voltage Range  
• Adjustable 1.20-438V Output Regulation  
• 5% Output Voltage Tolerance  
• Output Current Limiting  
LR8 is a high-voltage, low-output current, adjustable  
linear regulator. This regulator has a wide operating  
input voltage range of 13.2-450V. The output voltage  
can be adjusted from 1.20-438V, provided that the input  
voltage is at least 12V greater than the output voltage.  
The output voltage can be adjusted by means of two  
external resistors, R1 and R2, as shown in the typical  
application circuits. LR8 regulates the voltage differ-  
ence between VOUT and ADJ pins to a nominal value of  
1.20V. The 1.20V is amplified by the external resistor  
ratio R1 and R2. An internal constant bias current, of  
typically 10 µA, is connected to the ADJ pin. This  
increases VOUT by a constant voltage of 10 µA times  
R2.  
• 10 µA Typical ADJ Current  
• Internal Junction Temperature Limiting  
Applications  
• Offline SMPS startup circuits  
• Adjustable high-voltage constant current source  
• Industrial controls  
• Motor controls  
• Battery chargers  
LR8 provides both current and temperature limiting.  
The output current limit is typically 20 mA and the  
minimum temperature limit is +125°C. An output short-  
circuit current will therefore be limited to 20 mA. When  
the junction temperature reaches its temperature limit,  
the output current and/or output voltage will decrease  
to prevent the junction temperature from exceeding its  
temperature limit. For SMPS start-up circuit applica-  
tions, LR8 turns off when an external voltage greater  
than the output voltage of the LR8 is applied to VOUT of  
the LR8. To maintain stability, a bypass capacitor of  
1.0 µF or larger and a minimum DC output current of  
500 µA are required.  
• Power supplies  
LR8 is available in TO-243AA (SOT-89), TO-252 (D-  
PAK) and TO-92 packages.  
2015-2017 Microchip Technology Inc.  
DS20005399B-page 1  

与LR8相关器件

型号 品牌 获取价格 描述 数据表
LR8_07 SUPERTEX

获取价格

High Input Voltage Adjustable 3-Terminal Linear Regulator
LR8144DR ETC

获取价格

FIBER OPTIC RECEIVER
LR8301 LRC

获取价格

SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER
LR8406 LRC

获取价格

1.2A, 1.2MHz Synchronous Boost Converter with Output Disconnect
LR8406A33E LRC

获取价格

1.2A, 1.2MHz Synchronous Boost Converter with Output Disconnect
LR8406A50E LRC

获取价格

1.2A, 1.2MHz Synchronous Boost Converter with Output Disconnect
LR8406AE LRC

获取价格

1.2A, 1.2MHz Synchronous Boost Converter with Output Disconnect
LR8421 LRC

获取价格

5A, 500KHz Synchronous Boost Converter with Output Disconnect
LR8421AES LRC

获取价格

5A, 500KHz Synchronous Boost Converter with Output Disconnect
LR8425 LRC

获取价格

5A, 500KHz Synchronous Boost Converter with Output Disconnect