Inductors (Coils) for Power Lines
1
Data Sheet
LQM2MPN_GH Series 2016/0806 (mm/inch)
Multi-
layer
Thickness
LowRdc
Bias
RoHS
General
1.0mm
Reflow
OK
max.
Dimensions
Packaging
c
c
Code
Packaging
Minimum Quantity
0.5 0.2
L
ø180mm Embossed taping
3000
1.6 0.2
2.0 0.ꢀ
(in mm)
Rated Value ( : packaging code)
p
c
Inductance
Rated current
Rated current
Self resonance
frequency (min.)
Part Number
Inductance
DC resistance
test frequency (Based on Inductance change) (Based on Temperature rise)
LQM2MPNR16MGH
LQM2MPNR24MGH
LQM2MPNR33MGH
LQM2MPNR47MGH
LQM2MPNR68MGH
LQM2MPN1R0MGH
LQM2MPN1R5MGH
LQM2MPN2R2MGH
p
p
p
p
p
p
p
p
0.16µH ±20%
0.24µH ±20%
0.33µH ±20%
0.47µH ±20%
0.68µH ±20%
1.0µH ±20%
1.5µH ±20%
2.2µH ±20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
4.8A
4.0A
3.2A
3.2A
2.1A
1.6A
1.5A
1.0A
4.0A
3.4A
3.1A
2.5A
1.9A
1.9A
1.5A
1.0A
0.014Ω±25%
0.020Ω±25%
0.024Ω±25%
0.037Ω±25%
0.060Ω±25%
0.064Ω±25%
0.104Ω±25%
0.210Ω±25%
150MHz
130MHz
90MHz
80MHz
60MHz
60MHz
50MHz
40MHz
Class of magnetic shield: Magnetic shield of ferrite
Operating temperature range: -40~85℃
Only for reflow soldering.
Notice (Rating)
c
When applied Rated current to the Products,
Inductance will be within 30% of initial Inductance
value.
When applied Rated current to the Products, self
temperature rise shall be limited to 40°C max.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/