Spec No.: JELF243B_0042F-01
P1/8
CHIP COILS (CHIP INDUCTORS) LQM18PN□□□□DH□ REFERENCE SPECIFICATION
1. Scope
This reference specification applies to chip coils (chip inductors) LQM18PN_DH series for general electronic equipment.
2. Part Numbering
(Ex.)
LQ
M
18
P
N
2R2
M
D
H
D
Product ID Structure Dimension Application and Category Inductance Tolerance Dimension Other Packaging
(L × W)
characteristic
(T)
D: taping
*B: bulk
*B: Bulk packing is also available.
3. Part Number and Rating
Operating temperature range
Storage temperature range
-40°C to +85°C
-40°C to +85°C
Rated current
(mA)*3
Inductance
DC resistance
Self-resonant
frequency
(MHz min.)
Customer
Murata
Based on Based on
inductance temperature
change*1 rise*2
(Ω)
Nominal
value
(μH)
Part number
Part number
Tolerance
(%)
Typ.
Max.
Typ. Max. Typ. Max.
300 250 800 650
LQM18PN2R2MDHD
2.2
±20
0.38 0.475
60
*1 When rated current is applied to the products, inductance will be within ±30% of initial inductance value range.
*2 When rated current is applied to the products, temperature rise caused by self-generated heat shall be limited to 40°C
max.
*3 Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
4. Testing Conditions
Unless otherwise specified
Temperature: ordinary temperature (15°C to 35°C)
Humidity: ordinary humidity [25% to 85% (RH)]
In case of doubt
Temperature: 20°C±2°C
Humidity: 60% to 70% (RH)
Atmospheric pressure: 86 kPa to 106 kPa
5. Appearance and Dimensions
Unit mass (typical value): 0.004 g
6. Marking
No marking.
MURATA MFG CO., LTD