Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
1
Data Sheet
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH2HP_G0 Series (1008 Size)
Dimensions
Packaging
c
c
Code
Packaging
Minimum Quantity
Polarity Marking
L
180mm Embossed Tape
3000
2.±±±.2
2.5±±.2
±.85±±.ꢀ
±.85±±.ꢀ
(in mm)
Rated Value ( : packaging code)
p
c
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
Self Resonance
Frequency (min.)
Part Number
Inductance
DC Resistance
LQH2HPN2R2MG0
LQH2HPN3R3MG0
LQH2HPN4R7MG0
LQH2HPN6R8MG0
2.2µH 20ꢀ
3.3µH 20ꢀ
4.7µH 20ꢀ
6.8µH 20ꢀ
10µH 20ꢀ
22µH 20ꢀ
100µH 20ꢀ
1640mA
1290mA
1000mA
800mA
700mA
490mA
210mA
1000mA
810mA
700mA
590mA
490mA
340mA
130mA
0.17ohm 20ꢀ
0.27ohm 20ꢀ
0.36ohm 20ꢀ
0.5ohm 20ꢀ
0.73ohm 20ꢀ
1.6ohm 20ꢀ
10ohm 20ꢀ
80MHz
65MHz
60MHz
10MHz
10MHz
10MHz
5MHz
p
p
p
p
p
p
p
LQH2HPN100MG0
LQH2HPN220MG0
LQH2HPN101MG0
Test Frequency: 1MHz
Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
Notice (Rated Current)
c
Inductance will be more than the value which is
30ꢀ down from minimum rated Inductance value.
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.5.10
http://www.murata.com/