Document 581NR-1
Shielded Power Inductors
–
LPS5030
• Very low DCR; excellent current handling
• 4.9 × 4.9 mm footprint; less than 3 mm tall
Core material Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 226 – 244 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth
(Refer to dimensional drawing for part orientation in tape.)
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
DCR SRF
1. Please specify termination and packaging codes:
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
Part number1
LPS5030-105MLC
Termination: L=RoHS compliant silver-palladium-
platinum-glass frit.
LPS5030-901ML_
LPS5030-122ML_
LPS5030-172ML_
LPS5030-222ML_
LPS5030-332ML_
0.90
1.2
1.7
2.2
3.3
0.040 250
0.043 210
0.051 190
0.057 168
0.066 125
3.8
3.5
3.0
2.9
2.3
4.0
3.6
3.2
3.1
2.5
4.1
3.7
3.3
3.2
2.6
2.10 2.80
2.00 2.65
1.90 2.50
1.60 2.15
1.40 1.80
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
LPS5030-472ML_
LPS5030-562ML_
LPS5030-682ML_
LPS5030-822ML_
LPS5030-103ML_
4.7
5.6
6.8
8.2
0.083
0.089
0.099
0.125
0.127
84
70
56
45
30
1.9
1.8
1.6
1.6
1.4
2.0
1.8
1.7
1.7
1.4
2.0
1.9
1.7
1.7
1.4
1.30 1.75
1.25 1.65
1.20 1.60
1.10 1.55
1.00 1.50
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (750 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready.
10.0
To have a leader and trailer added
($25 charge), use code letter C
instead.
LPS5030-123ML_
LPS5030-153ML_
LPS5030-183ML_
LPS5030-223ML_
LPS5030-333ML_
12.0
15.0
18.0
22.0
33.0
0.155
0.160
0.170
0.190
0.260
24
32
27
24
19
1.3
1.4
1.4
0.95 1.40
0.80 0.90 0.90 0.92 1.40
0.80 0.82 0.87 0.90 1.30
0.70 0.75 0.78 0.88 1.25
0.60 0.63 0.64 0.85 1.20
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (2500 parts
per full reel).
LPS5030-473ML_
LPS5030-683ML_
LPS5030-823ML_
LPS5030-104ML_
LPS5030-124ML_
47.0
68.0
82.0
100
120
0.330
0.440
0.470
0.600
0.800
16
12
11
10
9
0.50 0.53 0.55 0.75 1.00
0.40 0.43 0.44 0.65 0.900
0.38 0.40 0.40 0.60 0.830
0.27 0.31 0.32 0.55 0.750
0.26 0.29 0.30 0.45 0.660
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A impedance analyzer or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
LPS5030-154ML_
LPS5030-224ML_
LPS5030-334ML_
LPS5030-474ML_
LPS5030-564ML_
150
220
330
470
560
0.860
1.35
1.80
2.80
3.20
7.5 0.22 0.25 0.263 0.42 0.570
6.0 0.21 0.235 0.245 0.36 0.500
5.0 0.155 0.155 0.200 0.32 0.420
4.0 0.117 0.134 0.146 0.28 0.370
3.6 0.110 0.130 0.140 0.23 0.320
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS5030-684ML_
680
3.80
5.10
7.60
10.0
11.0
3.0 0.100 0.120 0.126 0.20 0.290
2.5 0.100 0.110 0.110 0.18 0.250
2.0 0.068 0.080 0.089 0.15 0.210
1.8 0.069 0.081 0.086 0.13 0.170
1.6 0.063 0.074 0.080 0.10 0.150
LPS5030-105ML_ 1000
LPS5030-155ML_ 1500
LPS5030-185ML_ 1800
LPS5030-225ML_ 2200
LPS5030-335ML_ 3300
LPS5030-475ML_ 4700
19.5
26.0
1.3 0.056 0.063 0.067 0.090 0.125
1.1 0.049 0.056 0.059 0.080 0.110
Document 581NR-1 Revised 01/23/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.