Document 435-1
Shielded Power Inductors
–
LPS4018
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.8 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 54 – 100 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR
SRF
Inductance2 max3
typ4 10% 20% 30% 20°C 40°C
LPS4018-223MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
(µH)
(Ohms) (MHz) drop drop drop rise rise
LPS4018-561MR_
LPS4018-102NR_
LPS4018-222MR_
LPS4018-332MR_
LPS4018-472MR_
0.56 20% 0.033 250
1.0 30% 0.042 180
2.2 20% 0.070
3.3 20% 0.080
4.7 20% 0.125
4.8
3.8
2.7
1.9
1.8
5.2
3.9
2.8
2.0
1.9
5.3
4.0
2.9
2.0
1.9
1.9
1.8
1.5
1.4
1.3
2.8
2.5
2.0
1.9
1.8
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
90
75
65
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS4018-682MR_
6.8 20% 0.150
50
40
32
27
26
1.2
1.1
1.3
1.2
1.3
1.3
1.0
1.5
B=Less than full reel. In tape, but not
machine ready.
LPS4018-103MR_ 10 20%
LPS4018-153MR_ 15 20%
LPS4018-183MR_ 18 20%
LPS4018-223MR_ 22 20%
0.200
0.260
0.270
0.360
0.90 1.25
0.86 0.91 0.94 0.80 1.12
0.78 0.83 0.85 0.70 1.00
0.74 0.80 0.83 0.65 0.90
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
LPS4018-333MR_ 33 20%
LPS4018-473MR_ 47 20%
LPS4018-683MR_ 68 20%
LPS4018-104MR_ 100 20%
LPS4018-124MR_ 120 20%
0.420
0.650
0.950
1.40
20
16
13
10
0.58 0.64 0.68 0.55 0.80
0.51 0.55 0.56 0.45 0.68
0.41 0.45 0.46 0.40 0.56
0.34 0.36 0.37 0.35 0.50
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient.This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Compo-
nents” before soldering.
1.60
9.0 0.31 0.33 0.34 0.30 0.45
LPS4018-154MR_ 150 20%
LPS4018-184MR_ 180 20%
LPS4018-224MR_ 220 20%
LPS4018-334MR_ 330 20%
LPS4018-474MR_ 470 20%
2.00
2.50
3.70
5.90
7.80
8.0 0.27 0.29 0.30 0.28 0.40
7.5 0.24 0.26 0.27 0.26 0.36
6.5 0.21 0.225 0.235 0.20 0.30
5.5 0.18 0.19 0.20 0.17 0.23
4.5 0.14 0.16 0.17 0.15 0.20
LPS4018-564MR_ 560 20% 10.0
LPS4018-684MR_ 680 20% 11.5
LPS4018-824MR_ 820 20% 14.0
LPS4018-105MR_ 1000 20% 18.0
4.0 0.13 0.14 0.15 0.14 0.18
3.5 0.12 0.13 0.14 0.12 0.16
2.9 0.11 0.12 0.13 0.10 0.14
2.8 0.10 0.11 0.11 0.098 0.125
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220
µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to
order, contact Coilcraft or visit http://order.coilcraft.com.
Document 435-1 Revised 09/02/15