Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 433-1
Shielded Power Inductors
–
LPS4012
Halogen
Free
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.2 mm tall
• AEC-Q200 Grade 1 (–40°C to +125°C)
AEC
Core material Ferrite
+
Q200 125°C
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 54 – 64 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85ꢀ relative humidity)
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR
SRF
Inductance2 max3
typ4 10% 20% 30% 20°C 40°C
LPS4012-225MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
(µH)
(Ohms) (MHz) drop drop drop rise rise
LPS4012-331MR_
0.33 20ꢀ 0.025 375
5.2
5.4
5.5
2.2
3.0
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
LPS4012-681MR_ has been changed to LPS4012-681NR_.
The LPS4012-681MR_ is not available.
LPS4012-681NR_
LPS4012-102NR_
LPS4012-152MR_
LPS4012-222MR_
0.68 30ꢀ 0.055 220
1.0 30ꢀ 0.060 180
1.5 20ꢀ 0.070 140
2.2 20ꢀ 0.100 115
3.5
2.8
2.6
2.3
3.6
2.9
2.7
2.4
3.7
3.0
2.8
2.5
1.8
1.7
1.6
1.2
2.4
2.4
2.2
1.75
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel). Quantities less than
full reel available: in tape (not
machine ready) or with leader and
trailer ($25 charge).
LPS4012-332MR_
LPS4012-472MR_
LPS4012-562MR_
LPS4012-682MR_
3.3 20ꢀ 0.100 100
1.3
1.6
1.5
1.3
1.4
1.7
1.6
1.3
1.4
1.8
1.6
1.4
1.1
1.45 2.00
1.10 1.45
0.85 1.10
0.80 0.98
0.55 0.75
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
B=Less than full reel. In an effort to
simplify our part numbering system,
Coilcraft is eliminating the need for
multiple packaging codes. When
ordering, simply change the last
letter of your part number from B to C.
4.7 20ꢀ 0.175
5.6 20ꢀ 0.260
6.8 20ꢀ 0.340
70
60
55
40
LPS4012-103MR_ 10 20ꢀ
0.350
0.98 1.0
LPS4012-153MR_ 15 20ꢀ
LPS4012-223MR_ 22 20ꢀ
LPS4012-333MR_ 33 20ꢀ
LPS4012-473MR_ 47 20ꢀ
LPS4012-683MR_ 68 20ꢀ
0.550
0.600
0.825
1.40
30
25
22
19
15
0.79 0.82 0.84 0.53 0.73
0.74 0.78 0.79 0.52 0.70
0.45 0.47 0.48 0.46 0.61
0.35 0.37 0.38 0.40 0.52
0.30 0.32 0.33 0.35 0.46
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
1.70
LPS4012-104MR_ 100 20ꢀ
LPS4012-124MR_ 120 20ꢀ
LPS4012-154MR_ 150 20ꢀ
LPS4012-184MR_ 180 20ꢀ
LPS4012-224MR_ 220 20ꢀ
2.40
3.30
3.50
5.00
5.20
12
0.24 0.26 0.27 0.30 0.40
11.5 0.23 0.24 0.25 0.27 0.36
10.0 0.21 0.22 0.23 0.25 0.32
8.0 0.18 0.19 0.20 0.23 0.29
7.0 0.15 0.16 0.17 0.21 0.27
Click for temperature derating information.
LPS4012-334MR_ 330 20ꢀ
7.20
7.0 0.14 0.14 0.15 0.17 0.225
4.0 0.10 0.11 0.12 0.13 0.175
3.5 0.10 0.105 0.115 0.11 0.140
3.0 0.10 0.105 0.110 0.11 0.135
3.0 0.090 0.095 0.095 0.105 0.132
6. Current that causes the specified temperature rise from
25°C ambient.This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS4012-474MR_ 470 20ꢀ 10.0
LPS4012-564MR_ 560 20ꢀ 12.5
LPS4012-684MR_ 680 20ꢀ 13.5
LPS4012-824MR_ 820 20ꢀ 20.0
LPS4012-105MR_ 1000 20ꢀ 21.5
LPS4012-155MR_ 1500 20ꢀ 30.0
LPS4012-185MR_ 1800 20ꢀ 35.0
LPS4012-225MR_ 2200 20ꢀ 42.0
3.0 0.080 0.090 0.095 0.100 0.130
2.5 0.080 0.090 0.090 0.087 0.115
2.0 0.079 0.085 0.087 0.075 0.100
1.0 0.079 0.083 0.085 0.070 0.090
Document 433-1 Revised 02/23/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.