Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 436-1
Shielded Power Inductors
–
LPS3015
Halogen
Free
• Very low DCR; excellent current handling
• Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
+
Q200 125°C
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 40 – 45 mg
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3015-333MRC
Termination: R=RoHS compliant matte tin over nickel
over silver.
Part number1
LPS3015-102MR_
LPS3015-152MR_
LPS3015-182MR_
LPS3015-222MR_
LPS3015-332MR_
1.0
1.5
1.8
2.2
3.3
0.075 190
0.100 140
0.100 135
0.110 110
2.4
2.2
2.1
2.0
1.4
2.4
2.2
2.1
2.1
1.5
2.5
2.3
2.3
2.1
1.5
1.4
1.3
1.1
1.1
1.0
2.0
1.7
1.4
1.4
1.4
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts per
full reel). Quantities less than full reel
available: in tape (not machine ready)
or with leader and trailer ($25 charge).
0.130
90
LPS3015-472MR_
LPS3015-682MR_
LPS3015-103MR_
LPS3015-153MR_
LPS3015-183MR_
4.7
6.8
10
15
18
0.200
0.300
0.440
0.700
0.750
79
58
48
35
33
1.1
1.2
1.2
0.90 1.2
0.83 0.86 0.89 0.68 0.90
0.60 0.69 0.73 0.55 0.75
0.58 0.61 0.62 0.44 0.59
0.56 0.58 0.59 0.43 0.58
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 per full reel).
B=Less than full reel. In an effort to
simplify our part numbering system,
Coilcraft is eliminating the need for
multiple packaging codes. When or-
dering, simply change the last letter
of your part number from B to C.
LPS3015-223MR_
LPS3015-333MR_
LPS3015-473MR_
LPS3015-683MR_
22
33
47
68
0.825
1.30
1.55
2.35
3.40
30
23
17
14
11
0.48 0.49 0.50 0.42 0.57
0.39 0.41 0.42 0.35 0.48
0.36 0.38 0.39 0.30 0.40
0.29 0.30 0.31 0.25 0.33
0.24 0.25 0.26 0.19 0.26
LPS3015-104MR_ 100
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
LPS3015-124MR_ 120
LPS3015-154MR_ 150
LPS3015-184MR_ 180
LPS3015-224MR_ 220
4.65
6.25
8.60
9.50
9.0 0.21 0.22 0.22 0.17 0.23
8.0 0.19 0.20 0.20 0.15 0.20
7.5 0.16 0.17 0.17 0.13 0.175
6.0 0.15 0.16 0.16 0.11 0.155
Click for temperature derating information.
6. Current that causes the specified temperature rise
from 25°C ambient.This information is for reference
only and does not represent absolute maximum rat-
ings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Coilcraft Designer’s Kit C392 contains samples of 0.56 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 2200 µH parts (3 each) from four series. For details of kit contents and to
order, contact Coilcraft or visit https://www.coilcraft.com/en-us/kits/.
Document 436-1 Revised 12/13/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
贸泽上架Tallysman TW5386智能GNSS天线
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
