Document 436-1
ShieldedPowerInductors
–
LPS3015Series
• Very low DCR; excellent current handling
• Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 40 – 45 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Only pure water or alcohol recommended
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
LPS3015-333MLC
Partnumber1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
Termination: L= RoHS compliant silver-palladium-
LPS3015-102ML_
LPS3015-152ML_
LPS3015-182ML_
LPS3015-222ML_
LPS3015-332ML_
1.0
1.5
1.8
2.2
3.3
0.075
0.100
0.100
0.110
0.130
190
140
135
110
90
1.8
1.8
1.5
2.0
1.4
2.0
2.1
1.7
2.0
1.5
2.1
2.2
2.1
2.1
1.5
1.4
1.3
1.1
1.1
1.0
2.0
1.7
1.4
1.4
1.4
platinum-glass frit.
Special order: T = RoHS tin-silver-
copper (95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS3015-472ML_
LPS3015-682ML_
LPS3015-103ML_
LPS3015-153ML_
LPS3015-183ML_
4.7
6.8
10
15
18
0.200
0.300
0.440
0.700
0.750
79
58
48
35
33
1.1
1.2
1.2
0.90 1.2
0.68 0.90
0.55 0.75
0.44 0.59
0.43 0.58
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 per full reel).
0.83
0.60
0.58
0.56
0.86
0.69
0.61
0.58
0.89
0.73
0.62
0.59
LPS3015-223ML_
LPS3015-333ML_
LPS3015-473ML_
LPS3015-683ML_
LPS3015-104ML_
22
33
47
68
100
0.825
1.30
1.55
2.35
3.40
30
23
17
14
11
0.48
0.39
0.36
0.29
0.24
0.49
0.41
0.38
0.30
0.25
0.50
0.42
0.39
0.31
0.26
0.42 0.57
0.35 0.48
0.30 0.40
0.25 0.33
0.19 0.26
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
LPS3015-124ML_
LPS3015-154ML_
LPS3015-184ML_
LPS3015-224ML_
LPS3015-334ML_
120
150
180
220
330
4.65
6.25
8.60
9.50
9.0 0.21
8.0 0.19
7.5 0.16
6.0 0.15
5.0 0.10
0.22
0.20
0.17
0.16
0.11
0.22
0.20
0.17
0.16
0.11
0.17 0.23
0.15 0.20
0.13 0.175
0.11 0.155
0.070 0.095
23.0
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to
order, contact Coilcraft or visit http://order.coilcraft.com.
Specifications subject to change without notice.
Please check our website for latest information.
Document436-1 Revised08/05/09
© Coilcraft, Inc. 2009
5秒后页面跳转
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
贸泽上架Tallysman TW5386智能GNSS天线
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
