Document 428-1
Shielded Power Inductors
–
LPS3010
• Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall
• Very low DCR; excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 25 – 32 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3010-223MLC
Part number1
Termination: L=RoHS compliant silver-palladium-
platinum-glass frit.
LPS3010-471ML_
LPS3010-681ML_
LPS3010-102ML_
LPS3010-152ML_
LPS3010-182ML_
0.47
0.68
1.0
1.5
1.8
0.070 370
0.080 270
0.085 230
0.120 165
0.150 150
1.8
1.6
1.5
1.3
1.2
1.9
1.7
1.6
1.4
1.2
2.0
1.7
1.6
1.4
1.3
1.3
1.3
1.1
1.80
1.75
1.50
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
1.05 1.40
1.00 1.40
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS3010-222ML_
LPS3010-332ML_
LPS3010-472ML_
LPS3010-562ML_
LPS3010-682ML_
2.2
3.3
4.7
5.6
6.8
0.220 130
0.220 110
1.3
1.4
1.4
0.90 1.10
0.83 0.88 0.90 0.85 1.10
0.72 0.75 0.77 0.70 0.95
0.67 0.69 0.71 0.60 0.78
0.61 0.63 0.64 0.56 0.74
B=Less than full reel. In tape, but not
machine ready.
0.300
0.400
0.450
92
80
70
To have a leader and trailer added
($25 charge), use code letter C
instead.
LPS3010-822ML_
LPS3010-103ML_
LPS3010-123ML_
LPS3010-153ML_
LPS3010-183ML_
8.2
10
12
15
18
0.520
0.540
0.700
0.950
1.10
62
58
47
43
40
0.56 0.59 0.59 0.53 0.70
0.50 0.53 0.55 0.48 0.64
0.46 0.49 0.50 0.44 0.58
0.41 0.43 0.44 0.37 0.48
0.38 0.40 0.41 0.33 0.47
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
equivalent.
LPS3010-223ML_
LPS3010-333ML_
LPS3010-473ML_
LPS3010-683ML_
22
33
47
68
1.20
2.00
3.20
3.50
5.25
36
27
21
21
14
0.32 0.35 0.36 0.30 0.41
0.25 0.27 0.28 0.26 0.35
0.23 0.24 0.25 0.22 0.31
0.20 0.21 0.22 0.20 0.28
0.14 0.16 0.17 0.18 0.24
5. DC current that causes the specified inductance drop
from its value without current.
LPS3010-104ML_ 100
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS3010-124ML_ 120
LPS3010-154ML_ 150
LPS3010-184ML_ 180
LPS3010-224ML_ 220
LPS3010-334ML_ 330
6.10
9.15
10.1
12.5
18.5
12
11
9
8
7
0.13 0.15 0.15 0.14 0.19
0.13 0.14 0.14 0.13 0.17
0.11 0.12 0.13 0.11 0.15
0.10 0.11 0.12 0.095 0.13
0.10 0.105 0.115 0.085 0.11
• Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH
to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples
of 220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents
and to order, contact Coilcraft or visit http://order.coilcraft.com.
Document 428-1 Revised 11/22/11
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.