5秒后页面跳转
LPS3010-472ML PDF预览

LPS3010-472ML

更新时间: 2024-09-24 05:42:39
品牌 Logo 应用领域
线艺 - COILCRAFT 电感器
页数 文件大小 规格书
2页 203K
描述
Shielded Power Inductors

LPS3010-472ML 数据手册

 浏览型号LPS3010-472ML的Datasheet PDF文件第2页 
Document 428-1  
Shielded Power Inductors  
LPS3010 Series  
• Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall  
• Very low DCR; excellent current handling  
Core material Ferrite  
Core and winding loss See www.coilcraft.com/coreloss  
Terminations RoHS compliant silver-palladium-platinum-glass frit.  
Other terminations available at additional cost.  
Weight 25 – 32 mg  
Ambient temperature –40°C to +85°C with Irms current, +85°C to  
+125°C with derated current  
Storage temperature Component: –40°C to +125°C.  
Packaging: –40°C to +80°C  
Resistance to soldering heat Max three 40 second reflows at  
+260°C, parts cooled to room temperature between cycles  
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /  
85% relative humidity)  
Failures in Time (FIT) / Mean Time Between Failures (MTBF)  
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332  
Packaging 1000/7reel; 3500/13reel; Plastic tape: 12 mm wide,  
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth  
Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm  
PCB washing Only pure water or alcohol recommended  
Isat (A)5  
Irms (A)6  
1. Please specify termination and packaging codes:  
DCR SRF  
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C  
LPS3010-223MLC  
Partnumber1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise  
Termination: L= RoHS compliant silver-palladium-  
LPS3010-471ML_  
LPS3010-681ML_  
LPS3010-102ML_  
LPS3010-152ML_  
LPS3010-182ML_  
0.47  
0.68  
1.0  
1.5  
1.8  
0.070  
0.080  
0.085  
0.120  
0.150  
370  
270  
230  
165  
150  
1.8  
1.6  
1.5  
1.3  
1.2  
1.9  
1.7  
1.6  
1.4  
1.2  
2.0  
1.7  
1.6  
1.4  
1.3  
1.3  
1.3  
1.1  
1.80  
1.75  
1.50  
platinum-glass frit.  
Special order:  
T = RoHS tin-silver-copper (95.5/4/0.5)  
or S = non-RoHS tin-lead (63/37).  
1.05 1.40  
1.00 1.40  
Packaging: C=7machine-ready reel. EIA-481  
embossed plastic tape (1000 parts  
per full reel).  
LPS3010-222ML_  
LPS3010-332ML_  
LPS3010-472ML_  
LPS3010-562ML_  
LPS3010-682ML_  
2.2  
3.3  
4.7  
5.6  
6.8  
0.220  
0.220  
0.300  
0.400  
0.450  
130  
110  
92  
80  
70  
1.3  
1.4  
1.4  
0.90 1.10  
0.85 1.10  
0.70 0.95  
0.60 0.78  
0.56 0.74  
B= Less than full reel. In tape, but not  
machine ready.  
0.83  
0.72  
0.67  
0.61  
0.88  
0.75  
0.69  
0.63  
0.90  
0.77  
0.71  
0.64  
To have a leader and trailer added  
($25 charge), use code letter C  
instead.  
D=13machine-ready reel. EIA-481  
embossed plastic tape. Factory order  
only, not stocked (3500 parts per full  
reel).  
LPS3010-822ML_  
LPS3010-103ML_  
LPS3010-123ML_  
LPS3010-153ML_  
LPS3010-183ML_  
8.2  
10  
12  
15  
18  
0.520  
0.540  
0.700  
0.950  
1.10  
62  
58  
47  
43  
40  
0.56  
0.50  
0.46  
0.41  
0.38  
0.59  
0.53  
0.49  
0.43  
0.40  
0.59  
0.55  
0.50  
0.44  
0.41  
0.53 0.70  
0.48 0.64  
0.44 0.58  
0.37 0.48  
0.33 0.47  
2. Inductance tested at 100 kHz, 0.1 Vrms using an  
Agilent/HP 4192A. Inductance at 1 MHz is the same for  
parts with SRF 10 MHz.  
3. DCR measured on a micro-ohmmeter.  
4. SRF measured using an Agilent/HP 8753ES or  
equivalent.  
5. DC current that causes the specified inductance drop  
from its value without current.  
6. Current that causes the specified temperature rise from  
25°C ambient.  
LPS3010-223ML_  
LPS3010-333ML_  
LPS3010-473ML_  
LPS3010-683ML_  
LPS3010-104ML_  
22  
33  
47  
68  
100  
1.20  
2.00  
3.20  
3.50  
5.25  
36  
27  
21  
21  
14  
0.32  
0.25  
0.23  
0.20  
0.14  
0.35  
0.27  
0.24  
0.21  
0.16  
0.36  
0.28  
0.25  
0.22  
0.17  
0.30 0.41  
0.26 0.35  
0.22 0.31  
0.20 0.28  
0.18 0.24  
LPS3010-124ML_  
LPS3010-154ML_  
LPS3010-184ML_  
LPS3010-224ML_  
LPS3010-334ML_  
120  
150  
180  
220  
330  
6.10  
9.15  
10.1  
12  
11  
9
0.13  
0.13  
0.11  
0.10  
0.10  
0.15  
0.14  
0.12  
0.11  
0.15  
0.14  
0.13  
0.12  
0.14 0.19  
0.13 0.17  
0.11 0.15  
0.095 0.13  
7. Electrical specifications at 25°C.  
Refer to Doc 362 “Soldering Surface Mount Components”  
before soldering.  
12.5  
18.5  
8
7
0.105 0.115 0.085 0.11  
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)  
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to  
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of  
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and to  
order, contact Coilcraft or visit http://order.coilcraft.com.  
Specifications subject to change without notice.  
Please check our website for latest information.  
Document428-1 Revised08/05/09  
© Coilcraft, Inc. 2009  

与LPS3010-472ML相关器件

型号 品牌 获取价格 描述 数据表
LPS3010-472MLB COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-472MLC COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-472MLD COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-472MR COILCRAFT

获取价格

Shielded Power Inductors
LPS3010-473 COILCRAFT

获取价格

Low Profile Shielded Power Inductors
LPS3010-473ML COILCRAFT

获取价格

Shielded Power Inductors
LPS3010-473MLB COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-473MLC COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-473MLD COILCRAFT

获取价格

Shielded Power Inductors - LPS3010
LPS3010-473MR COILCRAFT

获取价格

Shielded Power Inductors