LPS3010-222MLB

更新时间： 2024-02-28 21:45:13

品牌	Logo	应用领域
线艺 - COILCRAFT		电感器固定电感器测试功率感应器
页数	文件大小	规格书
2页	130K
描述
Shielded Power Inductors - LPS3010

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

LPS3010-222MLB 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	1212
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8504.50.80.00	风险等级：	1.28
Is Samacsys：	N	大小写代码：	1212
构造：	Rectangular	型芯材料：	Ferrite
直流电阻：	0.22 Ω	标称电感 (L)：	2.2 µH
电感器应用：	POWER INDUCTOR	电感器类型：	GENERAL PURPOSE INDUCTOR
JESD-609代码：	e3	功能数量：	1
端子数量：	2	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装高度：	0.9 mm
封装长度：	2.95 mm	封装形式：	SMT
封装宽度：	2.95 mm	包装方法：	TR
最大额定电流：	1.1 A	参考标准：	AEC-Q200
自谐振频率：	130 MHz	形状/尺寸说明：	RECTANGULAR PACKAGE
屏蔽：	YES	表面贴装：	YES
端子面层：	Matte Tin (Sn) - with Nickel (Ni) barrier	端子位置：	DUAL ENDED
端子形状：	WRAPAROUND	测试频率：	0.1 MHz
容差：	20%	Base Number Matches：	1

LPS3010-222MLB 数据手册

Document 428-1

Shielded Power Inductors

–

LPS3010

• Ultra small 3.0 × 3.0 mm footprint; less than 1.0 mm tall

• Very low DCR; excellent current handling

Core material Ferrite

Core and winding loss See www.coilcraft.com/coreloss

Terminations RoHS compliant silver-palladium-platinum-glass frit.

Other terminations available at additional cost.

Weight 25 – 32 mg

Ambient temperature –40°C to +85°C with Irms current, +85°C to

+125°C with derated current

Storage temperature Component: –40°C to +125°C.

Tape and reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reﬂows at

+260°C, parts cooled to room temperature between cycles

Moisture Sensitivity Level (MSL) 1 (unlimited ﬂoor life at <30°C /

85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF)

38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,

0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth

Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm

PCB washing Tested with pure water or alcohol only. For other

solvents, see Doc787_PCB_Washing.pdf

Isat (A)⁵

Irms (A)⁶

1. Please specify termination and packaging codes:

DCR SRF

Inductance²max³typ⁴10% 20% 30% 20°C 40°C

20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise

LPS3010-223MLC

Part number¹

Termination: L=RoHS compliant silver-palladium-

platinum-glass frit.

LPS3010-471ML_

LPS3010-681ML_

LPS3010-102ML_

LPS3010-152ML_

LPS3010-182ML_

0.47

0.68

1.0

1.5

1.8

0.070 370

0.080 270

0.085 230

0.120 165

0.150 150

1.8

1.6

1.5

1.3

1.2

1.9

1.7

1.6

1.4

1.2

2.0

1.7

1.6

1.4

1.3

1.1

1.80

1.75

1.50

Special order:

T = RoHS tin-silver-copper

(95.5/4/0.5) or S = non-RoHS tin-

lead (63/37).

1.05 1.40

1.00 1.40

Packaging: C=7″ machine-ready reel. EIA-481

embossed plastic tape (1000 parts

per full reel).

LPS3010-222ML_

LPS3010-332ML_

LPS3010-472ML_

LPS3010-562ML_

LPS3010-682ML_

2.2

3.3

4.7

5.6

6.8

0.220 130

0.220 110

1.3

1.4

0.90 1.10

0.83 0.88 0.90 0.85 1.10

0.72 0.75 0.77 0.70 0.95

0.67 0.69 0.71 0.60 0.78

0.61 0.63 0.64 0.56 0.74

B=Less than full reel. In tape, but not

machine ready.

0.300

0.400

0.450

To have a leader and trailer added

($25 charge), use code letter C

instead.

LPS3010-822ML_

LPS3010-103ML_

LPS3010-123ML_

LPS3010-153ML_

LPS3010-183ML_

8.2

0.520

0.540

0.700

0.950

1.10

0.56 0.59 0.59 0.53 0.70

0.50 0.53 0.55 0.48 0.64

0.46 0.49 0.50 0.44 0.58

0.41 0.43 0.44 0.37 0.48

0.38 0.40 0.41 0.33 0.47

D=13″ machine-ready reel. EIA-481

embossed plastic tape. Factory

order only, not stocked (3500 parts

per full reel).

2. Inductance tested at 100 kHz, 0.1 Vrms using an

Agilent/HP 4192A. Inductance at 1 MHz is the same

for parts with SRF ≥10 MHz.

3. DCR measured on a micro-ohmmeter.

4. SRF measured using an Agilent/HP 8753ES or

equivalent.

LPS3010-223ML_

LPS3010-333ML_

LPS3010-473ML_

LPS3010-683ML_

1.20

2.00

3.20

3.50

5.25

0.32 0.35 0.36 0.30 0.41

0.25 0.27 0.28 0.26 0.35

0.23 0.24 0.25 0.22 0.31

0.20 0.21 0.22 0.20 0.28

0.14 0.16 0.17 0.18 0.24

5. DC current that causes the speciﬁed inductance drop

from its value without current.

LPS3010-104ML_ 100

6. Current that causes the speciﬁed temperature rise

from 25°C ambient.

7. Electrical speciﬁcations at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components”

before soldering.

LPS3010-124ML_ 120

LPS3010-154ML_ 150

LPS3010-184ML_ 180

LPS3010-224ML_ 220

LPS3010-334ML_ 330

6.10

9.15

10.1

12.5

18.5

0.13 0.15 0.15 0.14 0.19

0.13 0.14 0.14 0.13 0.17

0.11 0.12 0.13 0.11 0.15

0.10 0.11 0.12 0.095 0.13

0.10 0.105 0.115 0.085 0.11

• Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)

from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH

to 33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples

of 220 µH to 3300 µH parts (3 each) from all ﬁve series. For details of kit contents

and to order, contact Coilcraft or visit http://order.coilcraft.com.

Document 428-1 Revised 11/22/11

US +1-847-639-6400 sales@coilcraft.com

UK +44-1236-730595 sales@coilcraft-europe.com

Taiwan +886-2-2264 3646 sales@coilcraft.com.tw

China +86-21-6218 8074 sales@coilcraft.com.cn

Singapore + 65-6484 8412 sales@coilcraft.com.sg

This product may not be used in medical or high

risk applications without prior Coilcraft approval.

Specification subject to change without notice.

Please check web site for latest information.

中文翻译

下载PDF

LPS3010-222MLB 替代型号

型号	品牌	替代类型	描述	数据表
LPS3010-222MRB	COILCRAFT	类似代替	General Purpose Inductor, 2.2uH, 20%, 1 Element, Ferrite-Core, SMD, 1212, CHIP, 1212, HALO
LPS3010-222MLD	COILCRAFT	功能相似	Shielded Power Inductors - LPS3010
LPS3010-222MLC	COILCRAFT	功能相似	Shielded Power Inductors - LPS3010

与LPS3010-222MLB相关器件

型号	品牌	获取价格	描述	数据表
LPS3010-222MLC	COILCRAFT	获取价格	Shielded Power Inductors - LPS3010
LPS3010-222MLD	COILCRAFT	获取价格	Shielded Power Inductors - LPS3010
LPS3010-222MR	COILCRAFT	获取价格	Shielded Power Inductors
LPS3010-222MRB	COILCRAFT	获取价格	General Purpose Inductor, 2.2uH, 20%, 1 Element, Ferrite-Core, SMD, 1212, CHIP, 1212, HALO
LPS3010-223	COILCRAFT	获取价格	Low Profile Shielded Power Inductors
LPS3010-223ML	COILCRAFT	获取价格	Shielded Power Inductors
LPS3010-223MLB	COILCRAFT	获取价格	Shielded Power Inductors - LPS3010
LPS3010-223MLC	COILCRAFT	获取价格	Shielded Power Inductors - LPS3010
LPS3010-223MLD	COILCRAFT	获取价格	Shielded Power Inductors - LPS3010
LPS3010-223MR	COILCRAFT	获取价格	Shielded Power Inductors

与LPS3010-222MLB相关文章

解读BAV99LT1数据手册：产品特性、电气参数及替换型号推荐
2024-06-18

1
资料解析：P82B96TD引脚图说明、电气参数
2024-06-18

1
ATA6621N数据手册解读：产品特性、引脚图信息、电气参数
2024-06-18

4
一文AO3400引脚图、参数、产品特性
2024-06-18

2

产品中心

服务支持

精选活动

关于我们

帮助中心

LPS3010-222MLB

LPS3010-222MLB 技术参数

LPS3010-222MLB 数据手册

LPS3010-222MLB 替代型号

与LPS3010-222MLB相关器件

与LPS3010-222MLB相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LPS3010-222MLB

LPS3010-222MLB 技术参数

LPS3010-222MLB 数据手册

LPS3010-222MLB 替代型号

与LPS3010-222MLB相关器件

与LPS3010-222MLB相关文章

您还可以找

您在本页遇到什么问题？