Preliminary Datasheet
LPS100
Charger Interface Physical Layer IC
General Description
Features
Fully supports Quick Charge 2.0 specification
LPS100 is a low-cost USB high-voltage dedicated
charging port (HVDCP) interface IC for the Quick
Charge 2.0 specification. It incorporates all necessary
functions to add Quick Charge 2.0 capability to Power
Integrations’ switcher ICs such as TOP Switch or Tiny
Switch and other solutions employing traditional
feedback schemes. LPS100 supports the full output
Voltage range of either Class A or Class B. Optionally
Class B can be inhibited for protecting the battery
charger from accidental damage. LPS100 automatically
detects whether a connected Powered Device (PD) is
Quick Charge 2.0 capable before enabling output
Voltage adjustment. If a PD not compliant to Quick
Charge 2.0 is detected the LPS100 disables output
Voltage adjustment to ensure safe operation with
legacy 5V only USB PDs.
Class A: 5V, 9V, and 12V output Voltage
Class B: 5V, 9V, 12V, and 20V output
Voltage
USB battery charging specification revision 1.2
compatible
Automatic USB DCP shorting D+ to D- line
Default 5V mode operation
Supports TOP Switch and Tiny Switch
Very low power consumption
Below 1mW at 5V output
Fail safe operation
Adjacent pin-to-pin short-circuit fault
Open circuit pin fault
Typical Application Circuit
Ordering Information
Output Voltage
5V / 9V / 12V / 20V
VOUT
D-
R8
4.53KΩ
R1
LPS100 □ □
□
D+
GND
V3
BP
R5
C1
220nF
F: Pb-Free
Feedback
Network
LPS100
V2
V1
Package Type
SO: SOP-8
R4
R3
D-
D+
NC
R7
390KΩ
R2
Applications
Marking Information
Battery chargers for smart phones, tablets
Net books, digital cameras
Blue tooth accessories
USB power output ports
Device
Marking
Package Shipping
LPS100SOF
LPS
SOP-8
4K/REEL
LPS100
YWX
Marking indication:
Y:Production year W:Production week X:Series number
LPS100– 02
Dec.-2019
Email: marketing@lowpowersemi.com www.lowpowersemi.com Page 1 of 6