LPQ65131
Positive and Negative Output DC-DC Converter
General Description
Features
The CC100 device is a dual-output DC-DC converter
supply that generates a positive output up to 15 V and a
negative output down to –15 V. The converter maintains
low output voltage ripple. Typically, the maximum output
currents are in the 200- mA to 500-mA range, depending
on input voltage to output voltage ratio and the current
limit option. The combined (VPOS and VNEG) efficiency
◼
◼
◼
Input voltage range: 2.7-V to 5.5-V
AEC-Q100 Grade 2 Qualified
VPOS positive boost converter output
Adjustable output: up to 15 V
Switch current limit 2 A
Conversion efficiency: up to 89%
◼
VNEG negative inverting buck-boost converter
output
reaches 85% to keep systems cool or achieve a longer
battery-on time. The input voltage range of 2.7 V to 5.5 V
allows the devices to be powered from batteries or from
fixed 3.3-V or 5-V rails.
Adjustable output: down to –15 V
Switch current limit 2 A
Conversion efficiency: up to 81%
◼
◼
◼
◼
Control output for external P-channel FET
Supports complete disconnection from battery
1-µA shutdown current
The converter operates with a fixed frequency PWM
control topology and, when operating in power save
mode, uses a pulse-skipping mode at light load currents.
It operates with only 500-µA device quiescent current.
Individual enable inputs for flexible output
sequencing
Independent enable pins allow flexible power-up and
power-down sequencing for both outputs. The positive
and negative outputs operate independently, allowing for
non-symmetrical output voltages and currents.
◼
Protection features
Over voltage protection at VPOS and VNEG
Input under voltage lockout
VPOS and VNEG SCP
Thermal shutdown protection
The converter has an internal current limit, over voltage
protection, and a thermal shutdown for highest reliability
under fault conditions. The converter is available in a
4-mm × 4-mm QFN-24 package. The solution size is
small with a minimum switching frequency of 1.25 MHz
for smaller inductors and few other external components
required.
◼
4-mm × 4-mm QFN-24 package
Application
◼
LCD and AMOLED displays (approx. 4" to 17")
Personal electronics (notebook, monitor,
gaming)
Building automation (elevator, thermostat)
Healthcare, fitness, EPOS, industrial HMI, test
& measurement
Order Information
LPQ65131
F:Green
Package Type
QV:QFN4X4-24
D701 Rev0.1 Jan-2022
www.lowpowersemi.com
Email: marketing@lowpowersemi.com
Page 1 of 14