5秒后页面跳转
LPMG12 PDF预览

LPMG12

更新时间: 2024-11-21 14:56:47
品牌 Logo 应用领域
力特 - LITTELFUSE /
页数 文件大小 规格书
1页 208K
描述
See datasheet to operation details.

LPMG12 数据手册

  
Protection Relays  
Current Monitoring Relays and Transducers  
LCS10T12 / LPM SERIES  
Current Indicators  
Description  
The LCS10T12 connected to the LPM12 or LPMG12 indicator  
is a low cost, easy to use, go/no-go indication system for the  
remote monitoring of current flow. The LCS10T12 is installed  
on an adequately insulated wire of the monitored load. Its 12in.  
(30.4cm) leads are connected to the LPM12 or LPMG12 panel  
mount indicator directly or via customer supplied wires up to 500  
feet (152.4m) long.  
Operation  
When the monitored current is 5A turns, the panel mount LPM  
indicator will glow. The LCS10T12 is designed to maximize the  
light output of the panel mount indicator. It can be used to  
monitor current flow of less than 5A by passing the monitored  
conductor 2 or more times through the sensor.  
CAUTION:The LCS10T12 must be connected to the LPM12  
or LPMG12 before current flows to prevent damage or a shock  
hazard. Monitored wires must be properly insulated.  
Wiring Diagram  
Panel mount indicator designed to match the output of the  
LCS10T12. The LPM12 and LPMG12 come with 12 in. (30.4 cm)  
wires and a one piece mounting clip. Both devices install quickly  
in a 0.25 in. (6.35 mm) hole in panels from 0.031 - 0.062 in.  
(0.79 - 1.6 mm) thick.  
Wire Length: 500 ft.  
(152.4m) max.  
(Customer Supplied)  
CAUTION: The LCS10T12 must  
be connected to the LPM12 or  
LPMG12 before current flows  
to prevent damage or shock  
hazard. Monitored wires must  
be properly insulated.  
Features  
ꢀJ  
Low cost go/no go indication  
ꢀJ  
May be connected to wires up to 500 feet (152.4 m) long  
ꢀJ  
Remote monitoring of currents up to 50A  
ꢀJ  
Green or red LED indicator available  
Specifications  
Monitored Current  
Current Range  
2 - 50A AC  
Wire Passes Min. Current Max. Current Max. Inrush Max. Wire Dia.  
1
2
3
4
5A  
50A  
25A  
16.6A  
12.5A  
50/X  
120A  
60A  
40A  
30A  
120/X  
0.355 in. (9.0 mm)  
0.187 in. (4.7 mm)  
0.15 in. (3.8 mm)  
0.125 in. (3.2 mm)  
2.5A  
1.7A  
1.3A  
5/X  
Ordering Information  
5
Maximum Current  
50A turns continuous  
50/60Hz  
MODEL  
DESCRIPTION  
AC Line Frequency  
DC Resistance of  
Current Limiter  
Mechanical  
LCS10T12  
LPM12  
AC Current Sensor  
Red LED Indicator  
Green LED Indicator  
65 Ω  
Sensor Hole  
0.36 in. (9.14 mm) for up to #4 AWG (21.1 mm2)  
THHN wire  
LPMG12  
Termination  
Environmental  
Operating/Storage  
Temperature  
Weight  
12 in. (30.4 cm) wire leads  
If you don’t find the part you need, call us for a custom product 800-843-8848  
-40° to 60°C/-40° to 85°C  
LCS: 0.8 oz (23 g)  
LPM: 0.2 oz (6 g)  
© 2016 Littelfuse Protection Relays & Controls  
www.littelfuse.com/lcs-lpm  
Rev: 1-A-062716  

与LPMG12相关器件

型号 品牌 获取价格 描述 数据表
LPMM-S2-C PANDUIT

获取价格

Easy Selection Guide For Adhesive Backed Cable Tie Mounts
LPMM-S5-C PANDUIT

获取价格

Easy Selection Guide For Adhesive Backed Cable Tie Mounts
LPM-NE2000 ETC

获取价格

Ethernet LAN Card
LP-MSM ETC

获取价格

Surface-mount devices
LPMS-S8-C PANDUIT

获取价格

Easy Selection Guide For Adhesive Backed Cable Tie Mounts
LPN1040 ABCO

获取价格

Shape & Dimensions / Recommended Solder Land Pattern
LPN1040T-100K ABCO

获取价格

SMD NONSHIELDED TYPE
LPN1040T-101K ABCO

获取价格

SMD NONSHIELDED TYPE
LPN1040T-150K ABCO

获取价格

SMD NONSHIELDED TYPE
LPN1040T-151K ABCO

获取价格

SMD NONSHIELDED TYPE