Document 921-1
Coupled Inductors/Transformers LPH8045
Halogen
Free
• Three 1:1 windings can be wired in a variety of ways: As a
1:1, 2:1 or 1:2 transformer; as a 1:1 transformer with an aux
winding; as a gate drive transformer; as a SEPIC inductor, etc.
• Low DCR; excellent current handling
• 200 Vrms, one minute isolation (hipot) between windings
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver. Other
terminations available at additional cost.
Weight 825 – 875 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 250/7″reel; 1000/13″ reel; Plastic tape: 16 mm wide,
0.28 mm thick, 12 mm pocket spacing, 4.95 mm pocket depth
Recommended pick and place nozzle OD: 8 mm; ID: 4 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
1
Isat (A)4
20%
drop
Irms (A)5
DCR (Ohms)3
Inductance2
20% (µH)
SRF typ
(MHz)
10%
drop
30%
drop
20°C 40°C
Part number1
typ
max
rise
rise
LPH8045-682MR_
LPH8045-822MR_
LPH8045-103MR_
LPH8045-153MR_
LPH8045-223MR_
6.8
8.2
10
15
22
0.208
0.228
0.241
0.306
0.390
0.223
0.250
0.261
0.331
0.395
31.0
27.4
25.0
18.9
15.0
3.30
3.00
2.65
2.30
1.70
3.72
3.40
3.10
2.65
1.90
3.90
3.65
3.35
2.90
2.10
0.95
0.92
0.90
0.80
0.65
1.30
1.26
1.21
1.09
0.89
6
3
4
2
1. When ordering, please specify packaging code:
LPH8045-223MRC
1
inches
mm
Dimensions are in
2
6
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (250 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
0.350
8,90
max*
5
XXXX
3
5
0.041
1.04
D = 13″ machine-ready reel. EIA-481 embossed
plastic tape. Factory order only, not stocked
(1000 parts per full reel).
0.318
8,05
max
4
60°
B = Less than full reel. In an effort to simplify our
part numbering system, Coilcraft is eliminating
the need for multiple packaging codes. When
ordering, simply change the last letter of your
part number from B to C.
0.065 0.078 0.042
1.65 1.07
1,98
Typical 6 places
0.185
4,70
max
2. Inductance is for each winding, measured at 100 kHz, 0.1 Vrms,
0 Adc.
3. DCR is for each winding.
4. DC current at 25°C that causes the specified inductance drop from
its value without current.
5. Current that causes the specified temperature rise from 25°C
ambient.This information is for reference only and does not
represent absolute maximum ratings.
0.318
8,05
4
max
0.049
1,25
1
6
2
5
6
3
2
0.363 0.234
9.22 5.94
60°
3
5
4
0.335
8.50
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Recommended
Land Pattern
1
Dimensions are of the case not including the termination. For maximum overall
dimensions including the termination, add 0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted
part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm).
*
Document 921-1 Revised 11/15/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
