C&K LP Series
Miniature Snap-in Slide Switches
Features/Benefits
Typical Applications
• 6 to 11 AMPS available
• Easy assembly—Snap-in mounting
• Small appliances
• Outdoor appliances
• Contamination resistant—extended actuator • Portable tools
• Positive detent
• RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS
@ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA).
(LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA).
See page I-27 for additional ratings.
HOUSING: 6/6 nylon (UL94V-2), black.
J
ACTUATOR: Glass filled acetal, UV and petroleum resistant,
black.
CONTACTS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
9
INSULATION RESISTANCE: 10 Ω min.
TERMINALS: Q contact material: Copper, silver plated. See page
I-27 for additional contact materials.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the lat-
est information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J–25 and J–26. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
LP22 DPDT, 6 AMP
LP02 SPDT, 6 AMP
LP81 DPST, 11 AMP
LP82 DPDT, 11 AMP
Actuator
C2 Black cap
C1 Whitecap
C3 Red cap
Detent
1
With detent
Mounting Style
T2 Snap-in panel with tabs
(D, L, N markings only)
Terminations
03 Solder lug with hole
Housing Markings
NONE No markings
D
ON-OFF
Contact Material
Q
B
Silver
Gold
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–24