LP7810A
Ultra-high Efficiency TWS Charging Case Manager
Features
General Description
⚫ Case Charging Management
The LP7810A is an advanced TWS charging case
- Support 4.1V to 6.2V input voltage with 30V absolute
maximum input voltage rating
management IC targeting to improve the total battery run
time of the TWS earphones. The IC features a linear
charger protects up to 30V input voltage and digitally
programmable up to 930mA charge current via an I2C bus.
The smart discharge voltage management feature tries to
maximize the battery run time. The VOL and the VOR
outputs track the battery voltages of the earphones when
operating together with the companion linear charger
(LP4080) in the earphone, minimizing the power loss. An
NTC interface is offered to manage the charge and
discharge operation based on the battery temperature
sensed by the NTC resistor. Additional silicon temperature
management ensure the safe operation. Earphone
insertion and removal detections simplify the design of the
earphone detection. The LP7810A supports an
independent bidirectional communication bus to the
earphones. An I2C bus is offered for programmability and
flexibility of the device. The typical quiescent current is 4-
uA.
- Programmable fast charge current up to 930mA
- Programmable floating voltage with 0.5% accuracy
- Automatic recharge function
- 7.5% trickle charge current
- 7.5% termination current
⚫ Smart Earphone Charging Management
- Independent earphone insert detection and charging
path
- Smart earphone ultra-low dropout charging to
maximize battery run time
- Programmable earphone fast charge current up to
250mA each channel
- Programmable End of Charge (EEOC) current
- Bi-directional communication to earphones
⚫ 1-channel always-on Linear Regulator
⚫ Temperature Management
The whole system is in a small 16-pin 3x3 QFN package.
Order Information
- JIETA standard NTC management during charging
and discharging
LP7810A
- Charging current thermal foldback
- Thermal shutdown protection
F: Green/Pb-Free
Package Type
QV : QFN
⚫ I2C interface with interrupt indication
⚫ 4-uA ultra-low quiescent current
⚫ 3mm X 3mm QFN-16 package
Typical Application Circuit
⚫ RoHS Compliant and 100% Lead (Pb) free
Applications
2.2uH
L1
10uF
C5
1uF
C3
Battery
⚫ TWS charging case
⚫ Wireless microphone
⚫ Smart Glasses
16
12
11
PMID
Earphone
Pogo Pin
SW
BAT
1
Input
10
VIN
2P7
VOL
VOR
1Ω
R1
1uF
C2
1uF
C1
9
4
7
0.1uF
C4
SDA
LP7810A
VCC
2
3
I/O0
I/O1
I/O2
NTCS
10kΩ
R1
5
6
IRQb
SCL
MCU
NTC
GND
RNTC
13
8
I/O3
COMM
LED1
LED2
15
14
Version: 10/5/2022
www.lowpowersemi.com
email: marketing@lowpowersemi.com
1 / 26