LP7800S
High Efficiency TWS Case Manager
Features
General Description
Maximum input voltage up to 30-V with 15-V
The LP7800S is an advanced TWS charging case
management IC targeting to improve the total battery run
time of the TWS earphones. The IC integrates a linear
charger which contains completely charge modes with
up to 350-mA charge current, and a smart discharge
management module to protect the battery from
over-discharged to maximize the battery run time. The
IC features a high efficiency synchronous boost module,
automatic load detection and Key control discharge,
automatic shut-down while the discharge current is
lower than the cut-off current threshold. The IC includes
charging and discharging status indication through two
LEDs controller. The quiescent current is less than
20-µA in standby mode.
input-over-voltage protection
Charge management
- Maximum charge current up to 350-mA
- Default 4.2-V floating voltage with 1% accuracy
- Trickle current/constant current/constant voltage
mode supported
- Charge termination and automatic re-charge
- Dynamic power management for different input
source capacity application
Discharge management
- Smart discharge voltage management to maximize
the battery life
- 96% peak boost efficiency
- Automatic load detection
- Key control
- Low cut-off discharge current
- Inductor current-limit protection
- Short circuit protection
The device provides various safety features for battery
charging and discharging, including device junction
temperature-limit protection for charging by limiting the
charge current, which is implemented by an internal
thermal foldback regulation loop, battery discharge
inductor current-limit protection, VOUT short protection
and thermal shutdown.
Temperature Management
- Thermal foldback at 125℃ junction temperature
- Thermal shutdown at 150℃ junction temperature
Built-in charging and discharging indication
20-µA low quiescent current in standby mode
The LP7800S is available in a small 8-pin ESOP
package.
Applications
TWS charging case
Order Information
LP7800S
Battery Voltage
Default:4.20V
F: Pb-Free
Marking Information
Device
Marking
LPS
Package
Shipping
4K/REEL
Package Type
SP: ESOP-8
LP7800SSPF
LP7800S
YWX
ESOP-8
Marking indication:
Y: Year code. W: Week code. X: Batch numbers.
LP7800S Rev0.2 May.-2022
www.lowpowersemi.com
Email: marketing@lowpowersemi.com
Page 1 of 13