LP7800H
High Efficiency TWS Case Manager
Features
General Description
The LP7800H is an advanced TWS charging case
management IC targeting to improve the total battery run
time of the TWS earphones. The IC integrates a linear
charger which contains completely charge modes with
300mA and 200mA options. The LP7800H supports
smart discharge management module to protect the
battery from over-discharged to maximize the battery run
time. The IC features a high efficiency synchronous boost
module, automatic load detection and Key control
discharge, automatic shut-down while the discharge
current is lower than the cut-off current threshold. The IC
includes charging and discharging status indication
through two LEDs controller. The quiescent current is
less than 13-µA in standby mode.
⚫ Maximum input voltage up to 30-V with 6.5-V input-
over-voltage protection
⚫ Charge management
- Default 4.2-V floating voltage with 1% accuracy
- Trickle current/constant current(CC)/constant voltage
mode supported
- LP7800HA: 300mA constant current charge
- LP7800HB: 200mA constant current charge
- Charge termination and automatic re-charge
- Dynamic power management for different input
source capacity application
⚫ Discharge management
- Smart discharge voltage management to maximize
the battery life
- 96% peak boost efficiency
- Automatic load detection
- Key control
The device provides various safety features for battery
charging and discharging, including device junction
temperature-limit protection for charging by limiting the
charge current, which is implemented by an internal
thermal foldback regulation loop, battery discharge
inductor current-limit protection, VOUT short protection
and thermal shutdown.
- Low cut-off discharge current
- Inductor current-limit protection
- Short circuit protection
⚫ Temperature Management
- Thermal foldback at 125℃ junction temperature
- Thermal shutdown at 150℃ junction temperature
⚫ Built-in charging and discharging indication
⚫ 13-µA low quiescent current in standby mode
The LP7800H is available in a small 8-pin ESOP package.
Applications
⚫
TWS charging case
Order Information
ESOP-8
LP7800H
Marking Information
Battery Voltage
Default:4.20V
Device
Marking
LPS
Package
ESOP-8
Shipping
4K/REEL
LP7800HASPF
LP7800HA
YWX
F: Pb-Free
LPS
LP7800HB
YWX
Package Type
SP: ESOP-8
LP7800HBSPF
ESOP-8
4K/REEL
A: 300mA CC current, B:200mA CC current
Marking indication:
Y: Year code. W: Week code. X: Batch numbers.
LP7800H Rev1.0 Sep.-2022
www.lowpowersemi.com
Email: marketing@lowpowersemi.com
Page 1 of 13