ꢀꢁ ꢂꢃ ꢄꢅ
ꢆ
ꢅ
ꢇ
ꢈ
ꢉ
ꢊ
ꢀ
ꢋ
ꢌ
ꢈ
ꢍ
ꢋ
ꢎ
ꢏ
ꢐ
ꢑ
ꢀ
ꢋ
ꢌ
ꢈ
ꢒ
ꢓ
ꢋ
ꢁ
ꢋ
ꢌ ꢎꢕ ꢗ ꢏꢗ ꢔꢕ ꢒꢋ ꢌ ꢍ
ꢔ
ꢕ
ꢓ
ꢐ
ꢖ
ꢔ
ꢀ
ꢊ
ꢕ
ꢋ
ꢓ
SLVS522C − JULY 2004 − REVISED OCTOBER 2004
D
D
D
Available in the Texas Instruments
NanoStar and NanoFree Wafer Chip
Scale Packages
D
D
D
D
Stable With Low-ESR Capacitors, Including
Ceramic
Over-Current and Thermal Protection
High Peak-Current Capability
Output Tolerance of:
− 1% (A Grade)
− 1.5% (Standard Grade)
For V
Data Sheet
Options 3 2.3 V, See LP2985LV
OUT
Ultra-Low Dropout, Typically
− 280 mV at Full Load of 150 mA
− 7 mV at 1 mA
D
Portable Applications
− Cellular Phones
− Palmtop and Laptop Computers
− Personal Digital Assistants (PDAs)
− Digital Cameras and Camcorders
− CD Players
D
D
D
D
Wide V Range . . . 16 V Max
IN
Low I . . . 850 µA at Full Load at 150 mA
Q
Shutdown Current . . . 0.01 µA Typ
− MP3 Players
Low Noise . . . 30 µV
Capacitor
With 10-nF Bypass
RMS
DBV (SOT-23) PACKAGE
(TOP VIEW)
YEQ, YEU, YZQ, OR YZU (WCSP) PACKAGE
(TOP VIEW)
C3
1
2
3
5
4
V
GND
ON/OFF
V
OUT
IN
C1
V
V
OUT
IN
BYPASS
B2
BYPASS
GND
A1
ON/OFF
A3
description/ordering information
The LP2985 family of fixed-output, low-dropout regulators offers exceptional, cost-effective performance for
both portable and nonportable applications. Available in voltages of 2.5 V, 2.6 V, 2.7 V, 2.8 V, 2.85 V, 3 V,
3.1 V, 3.2 V, 3.3 V, and 5 V, the family has an output tolerance of 1% for the A version (1.5% for the non-A version)
and is capable of delivering 150-mA continuous load current. Standard regulator features, such as over-current
and over-temperature protection, are included.
The LP2985 has a host of features that makes the regulator an ideal candidate for a variety of portable
applications:
• Low dropout: A PNP pass element allows a typical dropout of 280 mV at 150-mA load current and 7 mV
at 1-mA load.
• Low quiescent current: The use of a vertical PNP process allows for quiescent currents that are
considerably lower than those associated with traditional lateral PNP regulators.
• Shutdown: A shutdown feature is available, allowing the regulator to consume only 0.01 µA when the
ON/OFF pin is pulled low.
• Low-ESR-capacitor friendly: The regulator is stable with low-ESR capacitors, allowing the use of small,
inexpensive, ceramic capacitors in cost-sensitive applications.
• Low noise: A BYPASS pin allows for low-noise operation, with a typical output noise of 30 µV (RMS),
with the use of a 10-nF bypass capacitor.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoStar and NanoFree are trademarks of Texas Instruments.
ꢁ
ꢁ
ꢓ
ꢋ
ꢧ
ꢒ
ꢢ
ꢔ
ꢘ
ꢠ
ꢕ
ꢡ
ꢎ
ꢜ
ꢋ
ꢚ
ꢍ
ꢛ
ꢒ
ꢊ
ꢕ
ꢊ
ꢙ
ꢚ
ꢣ
ꢛ
ꢜ
ꢡ
ꢝ
ꢉ
ꢞ
ꢞ
ꢟ
ꢟ
ꢙ
ꢙ
ꢜ
ꢜ
ꢚ
ꢚ
ꢙ
ꢠ
ꢠ
ꢤ
ꢡ
ꢢ
ꢝ
ꢝ
ꢣ
ꢣ
ꢚ
ꢟ
ꢞ
ꢉ
ꢠ
ꢠ
ꢜ
ꢛ
ꢤ
ꢕꢣ
ꢢ
ꢥ
ꢠ
ꢦ
ꢙ
ꢡ
ꢞ
ꢠ
ꢟ
ꢙ
ꢟ
ꢜ
ꢝ
ꢚ
ꢢ
ꢧ
ꢞ
ꢚ
ꢟ
ꢟ
ꢣ
ꢠ
ꢨ
Copyright 2004, Texas Instruments Incorporated
ꢝ
ꢜ
ꢡ
ꢟ
ꢜ
ꢝ
ꢉ
ꢟ
ꢜ
ꢠ
ꢤ
ꢙ
ꢛ
ꢙ
ꢡ
ꢣ
ꢝ
ꢟ
ꢩ
ꢟ
ꢣ
ꢝ
ꢜ
ꢛ
ꢪ
ꢞ
ꢎ
ꢚ
ꢉ
ꢣ
ꢠ
ꢟ
ꢞ
ꢚ
ꢧ
ꢞ
ꢝ
ꢧ
ꢫ
ꢞ
ꢟ ꢣ ꢠ ꢟꢙ ꢚꢭ ꢜꢛ ꢞ ꢦꢦ ꢤꢞ ꢝ ꢞ ꢉ ꢣ ꢟ ꢣ ꢝ ꢠ ꢨ
ꢝ
ꢝ
ꢞ
ꢚ
ꢟ
ꢬ
ꢨ
ꢁ
ꢝ
ꢜ
ꢧ
ꢢ
ꢡ
ꢟ
ꢙ
ꢜ
ꢚ
ꢤ
ꢝ
ꢜ
ꢡ
ꢣ
ꢠ
ꢠ
ꢙ
ꢚ
ꢭ
ꢧ
ꢜ
ꢣ
ꢠ
ꢚ
ꢜ
ꢟ
ꢚ
ꢣ
ꢡ
ꢣ
ꢠ
ꢠ
ꢞ
ꢝ
ꢙ
ꢦ
ꢬ
ꢙ
ꢚ
ꢡ
ꢦ
ꢢ
ꢧ
ꢣ
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265