nanoLOC TRX
High Performance RF Transceiver
Enabling Location Awareness
Highly Integrated Solution with Ranging
Key Features
The nanoLOC TRX Transceiver is a highly integrated mixed
signal chip utilizing Nanotron’s unique wireless communica-
tion technology CSS (Chirp Spread Spectrum).
+
Single chip 2.4 GHz RF Transceiver operating in the
worldwide ISM Band
+
+
Integrated MAC controller with FEC and CRC checking
Automatic retransmission and acknowledgement, as
well as automatic address matching
With its unique ranging capability, nanoLOC can measure
the link distance between two nodes. Thus, nanoLOC sup-
ports location-aware applications including Location Based
Services (LBS), enhanced RFID, as well as asset tracking
(2D/3D RTLS). As ranging is performed during regular data
communication, additional infrastructure, power, and/or
bandwidth is not required.
+
+
Few external components required
Link distance estimation with built-in ranging capability
0
High precision ranging.. 2 m indoors / 1 m outdoors
+
Low current consumption:
0
0
0
0
Current consumption RX starts at .................33 mA
Current consumption TX.................30 mA @ 0dBm
Standby current with active RTC ...................1.2 µA
Low supply voltage.................................2.3 – 2.7 V
Improved Coexistence Performance
nanoLOC supports a freely adjustable center frequency with
3 non-overlapping frequency channels. This provides sup-
port for multiple physically independent networks and im-
proved coexistence performance with existing 2.4 GHz
wireless technologies.
+
+
Modulation ................... Chirp Spread Spectrum (CSS)
Media Access Techniques
0
0
0
FDMA .........................3 non-overlapping channels
CSMA/CA
TDMA
Data rates are selectable from 2 Mbps to 125 kbps. Due to
the chip’s unique chirp pulse, adjustment of the antenna is
not critical. This significantly simplifies the system’s installa-
tion and maintenance (“pick and place”).
+
+
+
+
+
+
+
+
+
Programmable data rates..............2 Mbps to 125 kbps
Clock available for external µC ..................32.768kHz
Integrated fast SPI interface .......................... 32 Mbps
Programmable output power............ -33 dBm – 0 dBm
External power amplifier supported
A sophisticated MAC controller with CSMA/CA and TDMA
support is included, as is Forward Error Correction (FEC)
and 128 bit hardware encryption. To minimize software and
microcontroller requirements, nanoLOC also provides
scrambling, automatic address matching, and packet
retransmission.
Receiver sensitivity ................................up to -97 dBm
RSSI sensitivity...............................................-95 dBm
In-band C/I ..............3 dB @ 250 kbps & C = -80 dBm
Industrial temperature range..............-40 °C to +85 °C
© 2007 Nanotron Technologies GmbH | All rights reserved
Preliminary Product Information. Subject to change without notice.
NA-06-S-0014-E-1.02